Instruction manual
Table Of Contents
- [en] Instruction manual
- Table of contents
- [en] Instruction manual
- ] Causes of damage 7
- 7 Environmental protection 8
- * Getting to know your appliance 9
- _ Accessories 11
- K Before using for the first time 12
- 1 Operating the appliance 13
- O Time-setting options 15
- A Childproof lock 16
- ^ Microwave 16
- Q Basic settings 18
- @ Meat thermometer 20
- F Sabbath mode 21
- D Cleaning agent 22
- . Cleaning function 24
- p Rails 25
- q Appliance door 27
- 3 Trouble shooting 28
- 4 Customer service 29
- n Baking and roasting assistant 30
- P Programmes 31
- J Tested for you in our cooking studio 32
- ( Important safety information
- Important safety information
- General information
- Microwave
- Meat thermometer
- Cleaning function
- General information
- Microwave
- Saving energy
- Environmentally-friendly disposal
- Control panel
- Controls
- Main menu
- Cooking compartment functions
- Accessories included
- Inserting accessories
- Optional accessories
- Initial use
- Setting the language
- Setting the time
- 1. Use the & button to navigate to the bottom line.
- 2. Use the ( or ) button to select the current hour.
- 3. Use the & button to navigate to the next line.
- 4. Use the ( or ) button to select the current minute.
- 5. Press the % button repeatedly until "Time" appears.
- 6. Use the ) button to select the next setting.
- Setting the date
- 1. Use the & button to navigate to the bottom line.
- 2. Use the ( or ) button to select the current day.
- 3. Use the & button to navigate to the next line.
- 4. Use the ( or ) button to select the current month.
- 5. Use the & button to navigate to the next line.
- 6. Use the ( or ) button to select the current year.
- 7. Press the % button repeatedly until "Date" appears.
- 8. Use the ) button to apply the settings.
- Cleaning the cooking compartment
- 1. Remove the accessories from the cooking compartment.
- 2. Remove leftover packaging, such as polystyrene pellets, from the cooking compartment.
- 3. Before heating the appliance, wipe the smooth surfaces in the cooking compartment with a soft, wet cloth.
- 4. Use the # touch button to switch on the appliance.
- 5. Set the heating type and temperature, then start the appliance operation. ~ "Setting and starting the appliance operation" on page 13
- 6. Keep the kitchen ventilated while the appliance is heating up.
- 7. Use the # touch button to switch off the appliance after the indicated cooking time.
- 8. Wait until the cooking compartment has cooled down.
- 9. Clean the smooth surfaces with soapy water and a dish cloth.
- Cleaning the accessories
- Switching the appliance on and off
- Setting and starting the appliance operation
- 1. Touch the # touch button to switch on the appliance.
- 2. Use the ( or ) button to select the type of heating.
- 3. Use the & button to navigate to the next line.
- 4. Use the ( or ) button to select the temperature.
- 5. Touch the # touch button to start the appliance operation.
- Default values
- Heating bar
- Run time
- Displaying the current temperature
- Further information
- Changing or cancelling the appliance operation
- Heating up the appliance quickly
- Function
- Type of heating
- Place the food in the cooking compartment
- Notes
- Activating the "Rapid heating" function
- 2. Touch the # touch button to start the appliance operation.
- 3. Touch the ° touch button to activate the "Rapid heating" function.
- 4. Once the set temperature has been reached, the "Rapid heating" function switches off automatically. The ° symbol disappears from the display. Place the food in the cooking compartment.
- Showing and hiding the time-setting options
- Setting the timer
- Setting the cooking time
- Start delay – "Ready at"
- Checking, changing or deleting settings
- Automatic childproof lock
- Activating
- 2. Touch the 0 touch button.
- 3. Use the ( or ) button to select "MyProfile".
- 4. Use the & button to navigate to the next line.
- 5. Use the ( or ) button to select "Automatic childproof lock".
- 6. Use the & button to navigate to the bottom line.
- 7. Use the ) button to select "Activated".
- 8. Touch the 0 touch button.
- 9. Use the & button to navigate to the next line to save the setting.
- 2. Touch the ± touch button.
- 3. Switch on the required appliance operation.
- 2. Touch the ± touch button.
- 3. Touch the 0 touch button.
- 4. Use the ( or ) button to select "MyProfile".
- 5. Use the & button to navigate to the next line.
- 6. Use the ( or ) button to select "Automatic childproof lock".
- 7. Use the & button to navigate to the bottom line.
- 8. Use the ( button to select "Deactivated".
- 9. Touch the 0 touch button.
- 10. Use the & button to navigate to the next line to save the setting.
- 11. Touch the ± touch button.
- One-time childproof lock
- Cookware
- Microwave power settings
- Setting the microwave
- Note:
- 2. Touch the 0 touch button.
- 3. Use the ( or ) button to select "Microwave •".
- 4. Use the & button to open the microwave menu.
- 5. Use the ( or ) button to set the required microwave output setting.
- 6. Use the & button to navigate to the next line.
- 7. Use the ( or ) button to set the required cooking time.
- 8. Touch the # touch button to start the appliance operation.
- Changing the cooking time
- Changing the microwave output setting
- The cooking time has elapsed
- Pausing the operation
- Cancelling the operation
- Starting drying
- Caution!
- 2. Remove the worst dirt from the cooking compartment immediately and wipe away moisture from the cooking compartment floor.
- 3. If necessary, touch the # touch button to switch the appliance on.
- 4. Touch the 0 touch button to display the operating modes.
- 5. Use the ( or ) button to select "Drying ª".
- 6. Use the & button to navigate to the next line.
- 7. Use the & button to navigate to the next line.
- 8. Touch the # touch button.
- 9. Open the appliance door and leave it open for 1 to 2 minutes so that the moisture in the cooking compartment can escape.
- Setting the microwave to combi-mode
- 1. Touch the # touch button to switch on the appliance.
- 2. Touch the 0 touch button.
- 3. Use the ( or ) button to select "Microwave combination operation ¡".
- 4. Touch the & touch button.
- 5. Use the ( or ) touch button to set the required type of heating.
- 6. Use the & button to navigate to the next line.
- 7. Use the & button to navigate to the next line.
- 8. Use the & button to navigate to the next line.
- 9. Touch the # touch button.
- The cooking time has elapsed
- Pausing the operation
- Cancelling the operation
- Changing MyProfile
- 1. Touch the # touch button.
- 2. Touch the 0 touch button.
- 3. Use the ( or ) button to select "MyProfile 4".
- 4. Use the & button to navigate to the next line.
- 5. Use the ( or ) button to select the setting.
- 6. Use the & button to navigate to the selection.
- 7. Use the ( or ) button to select the setting.
- 8. Touch the 0 touch button.
- 9. To save the setting, use the & button to select "Save".
- List of basic settings
- Setting favourites
- Note:
- 2. Touch the 0 touch button.
- 3. Use the ( or ) button to select "MyProfile 4".
- 4. Use the & button to navigate to the next line.
- 5. Use the ( or ) button to select "Favourites".
- 6. Use the & button to select "Setting favourites".
- 7. Use the ( or ) button to select the heating type.
- 8. Use the & button to navigate to the next line.
- 9. Use the ( or ) button to select "Activated" or "Deactivated".
- 10. Touch the 0 touch button.
- 11. To save the setting, use the & button to select "Save".
- Suitable types of heating
- Inserting the meat probe into the food
- Setting and starting the appliance operation
- Changing or cancelling the appliance operation
- Core temperatures of different foods
- Starting Sabbath mode
- 1. Touch the # touch button.
- 2. Use the ( or ) button to select "Sabbath mode".
- 3. Use the & button to navigate to the next line.
- 4. Use the ( or ) button to select the temperature.
- 5. Use the & button to navigate to the next line.
- 6. Use the ( or ) button to select the cooking time.
- 7. Touch the # touch button.
- Cancelling Sabbath mode
- Suitable cleaning agents
- Surfaces in the cooking compartment
- Keeping the appliance clean
- EcoClean
- Note:
- Prior to initiating the cleaning function
- Starting
- Once the cleaning function has ended
- Floor cleaning aid
- : Warning
- Starting
- Notes
- 2. Mix 0.4 litres of water (not distilled water) with a drop of washing-up liquid and pour into the middle of the cooking compartment floor.
- 3. Touch the # touch button.
- 4. Touch the 0 touch button.
- 5. Use the ( or ) button to select "Floor cleaning aid ®".
- 6. Use the & button to navigate to the next line.
- 7. Touch the # touch button.
- Finishing
- Subsequent cleaning
- 1. Open the appliance door and remove the remaining water with an absorbent sponge cloth.
- 2. Clean the smooth surfaces in the cooking compartment with a dish cloth or a soft brush. Stubborn residues can be removed using a stainless steel scouring pad.
- 3. Remove limescale with a cloth soaked in vinegar. Then wipe with clean water and rub dry with a soft cloth (including under the door seal).
- 4. Use the # touch button to switch off the appliance.
- 5. Leave the appliance door ajar in the stop position (approx. 30°) for approx. 1 hour to allow the enamel surfaces in the cooking compartment to dry thoroughly.
- Removing heavy deposits of dirt
- Detaching and refitting the rails
- : Warning
- Detaching the rails
- Inserting the holders
- 1. The holders at the front differ from those at the rear (fig. !).
- 2. Use the hook to mount the front holder at the top into the round hole ‚, set it at a slight incline, attach it at the bottom, and straighten it ƒ (fig. ").
- 3. Use the hook to attach the rear holder into the upper hole ‚ and push it into the lower hole ƒ (fig. #).
- Attaching the rails
- Removing the door cover
- 1. Open the appliance door slightly.
- 2. Press on the right and left side of the cover (fig. !).
- 3. Remove the cover (fig. "). Close the appliance door carefully
- 4. Open the appliance door again slightly. Put the cover back in place and press on it until it clicks audibly into place (fig. #).
- 5. Close the appliance door.
- Removing and fitting the door panels
- Removing the door panels from the appliance
- 1. Open the appliance door slightly.
- 2. Press on the right and left side of the cover (fig. !).
- 3. Remove the cover (fig. ").
- 4. Undo and remove the screws on the left and right of the appliance door (fig. #).
- 5. Before closing the door again, trap a tea towel that has been folded several times in the door (fig. $).
- 6. Push both retainers at the top of the intermediate panel upwards, but do not remove them (fig. %). Hold the panel with one hand. Take out the panel.
- Fitting the door panels on the appliance
- 1. Insert the intermediate panel into the retainer at the bottom and push it in firmly from the top (fig. !).
- 2. Push both retainers downwards (fig. ").
- 3. Insert the front panel downwards into the retainers (fig. #).
- 4. Close the front panel until both upper hooks are opposite the opening (fig. $).
- 5. Press the front panel down until it clicks audibly into place (fig. %).
- 6. Open the appliance door again slightly and remove the tea towel.
- 7. Screw both screws back in on the left and right.
- 8. Put the cover back in place and press on it until it clicks audibly into place (fig. &).
- 9. Close the appliance door.
- Removing the door panels from the appliance
- Fault table
- Maximum operating time exceeded
- Cooking compartment bulbs
- E number and FD number
- Information on the settings
- Selecting a meal
- Setting the food
- 1. Touch the # touch button to switch on the appliance.
- 2. Touch the 0 touch button.
- 3. Use the ( or ) button to select the "Baking and roasting assistant".
- 4. Use the & button to navigate to the next line.
- 5. Use the ( or ) button to select the required category.
- 6. Use the & button to navigate to the next line.
- 7. Use the ( or ) button to select the required meal.
- 8. Use the & button to navigate to the next line.
- 9. If required, you can change the recommended settings. Touch the & button to do this.
- 10. Touch the # touch button to start the appliance operation.
- Continue cooking
- Cancelling
- Switching off the appliance
- Information on the settings
- Meat thermometer
- Selecting a dish
- Setting the programme
- 1. Touch the # touch button to switch on the appliance.
- 2. Touch the 0 touch button.
- 3. Use the ( or ) button to select "Microwave programmes".
- 4. Use the & button to navigate to the next line.
- 5. Use the ( or ) button to select the required microwave programme.
- 6. Use the & button to navigate to the next line.
- 7. Use the ( or ) button to set the weight.
- 8. Firstly touch the % n button to navigate upwards and then touch the ) button to navigate to the next line.
- 9. Touch the # touch button to start the appliance operation.
- Continue cooking
- Cancel
- Switching off the appliance
- Silicone moulds
- Baking
- Roasting and braising
- Grilling
- Convenience products
- Microwave
- Yogurt
- Preparing yogurt
- 1. Heat 1 litre of milk (3.5 % fat) to 90 °C on the hob and then cool down to 40 °C.
- 2. Stir in 150 g (chilled) yogurt.
- 3. Pour into cups or small jars and cover with cling film.
- 4. Place the cups or jars onto the cooking compartment floor and use the settings indicated in the table.
- 5. After preparation, leave the yogurt to cool in the refrigerator.
- Preparing yogurt
- Eco types of heating
- Acrylamide in foodstuffs
- Slow cook
- Drying
- Preserving
- Allowing the dough to prove at dough proving setting
- Defrosting
- Heating food in a microwave
- Keeping warm
- Test dishes
- [en] Instruction manual
Customer service en
29
--------
Maximum operating time exceeded
Your appliance ends the operation automatically when
no cooking time is set and the setting has not been
changed for a long time.
The actual cooking time until the operation is stopped
automatically varies according to the selected settings.
The appliance display indicates that the operation will
end automatically. Afterwards, the operation is stopped.
To use the appliance again, switch it off beforehand.
Then switch the appliance on again and set the
required operation.
Cooking compartment bulbs
To light the interior of your cooking compartment, your
appliance has one or more long-life LED bulbs.
However, if ever an LED bulb or the bulb's glass cover
is defective, call the after-sales service. The lamp cover
must not be removed.
4Customer service
Customer service
Our after-sales service is there for you if your appliance
needs to be repaired. We will always find an
appropriate solution, also in order to avoid after-sales
personnel having to make unnecessary visits.
E number and FD number
When calling us, please quote the full product number
(E no.) and the production number (FD no.) so that we
can provide you with the correct advice. The rating plate
bearing these numbers can be found when you open
the appliance door.
If your appliance operates with steam, you will find the
rating plate on the right-hand side behind the panel.
To save time, you can make a note of the numbers for
your appliance and the telephone number of the after-
sales service in the space below in case you need
them.
Please note that a visit from an after-sales service
engineer is not free of charge in the event that the
appliance has been misused, even during the warranty
period.
Please find the contact data of all countries in the
enclosed customer service list.
To book an engineer visit and product advice
Rely on the professionalism of the manufacturer. You
can therefore be sure that the repair is carried out by
trained service technicians who carry original spare
parts for your appliances.
The appliance cannot be switched on;
the 1 symbol is shown on the dis-
play
The automatic childproof lock is activated
Press and hold the 0 touch button until the 1 sym-
bol goes out
The appliance cannot be operated
when it is switched on; the 1 sym-
bol is shown on the display
The childproof lock is activated
Press and hold the 0 touch button until the 1 sym-
bol goes out
The appliance does not heat up; 6
is shown on the display
Demo mode is activated in the basic settings Disconnect the appliance from the mains for approx.
10 seconds (switch off the circuit breaker in the fuse
box) and then deactivate demo mode in the basic set-
tings within 3 minutes
~ "Basic settings" on page 18
"EXXXX" appears on the display, e.g.
"E0111"
Technical problem Switch the appliance off and back on again
If the message appears again, call the after-sales ser-
vice
=1U)'(1U
7\SH
E no.
FD no.
After-sales service O
GB 0344 892 8989
Calls charged at local or mobile rate.
IE 01450 2655
0.03 € per minute at peak. Off peak 0.0088 €
per minute.