Extractor hood [en] Instructions for installation and use
en Table of contents INSTRUCTION MANUAL.......................................................... 2 s no i t c u r t s n I ] ne [ rof 8 Intended use................................................................... 2 ( Important safety information ........................................ 3 7 Environmental protection ............................................. 4 Ç Operating modes ........................................................... 5 1 Operating the appliance....................................
Important safety information en (Important safety information : Warning no i t amro f n i y t e f as t na t ropmI Danger of suffocation! Packaging material is dangerous to children. Never allow children to play with packaging material. : Warning Danger of death! Risk of poisoning from flue gases that are drawn back in. Always ensure adequate fresh air in the room if the appliance is being operated in exhaust air mode at the same time as room airdependent heat-producing appliance is being operated.
en Environmental protection : Warning Risk of burns! The accessible parts become very hot when in operation. Never touch hot parts. Keep children at a safe distance. : Warning Risk of injury! ■ Components inside the appliance may have sharp edges. Wear protective gloves. Risk of injury! ■ Items placed on the appliance may fall down. Do not place any objects on the appliance. Risk of injury! ■ The light emitted by LED lights is very dazzling, and can damage the eyes (risk group 1).
Operating modes en Environmentally-friendly disposal Dispose of packaging in an environmentally-friendly manner. 1Operating the appliance These instructions apply to several appliance variants. It is possible that individual features are described which do not apply to your appliance. ecna i l p a eh t gn i t arepO This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment WEEE).
en Cleaning and maintenance Control panel model 3 2Cleaning and maintenance : Warning ecnane t n i am dna gn i nae lC Risk of burns! The appliance will become hot during operation, especially near the bulbs. Allow the appliance to cool down before cleaning. : Warning Risk of electric shock! Penetrating moisture may result in an electric shock. Clean the appliance using a damp cloth only. Before cleaning, pull out the mains plug or switch off the circuit breaker in the fuse box.
Cleaning and maintenance Area Stainless steel Cleaning agent Hot soapy water: Clean with a dish cloth and then dry with a soft cloth. Clean stainless steel surfaces in the grind direction only. Special stainless steel cleaning products are available from our after-sales service or from specialist retailers. Apply a very thin layer of the cleaning product with a soft cloth. Painted surfaces Hot soapy water: Clean using a damp dish cloth and dry with a soft cloth/towel.
en Trouble shooting On appliances with a glass plate in the filter pull-out: ■ ■ The glass plate can be removed easily and can be cleaned in the dishwasher. To remove it, carefully lift the glass plate. Replacing bulbs These instructions apply to several appliance variants. It is possible that individual features are described which do not apply to your appliance. : Warning Risk of burns! Halogen bulbs become very hot when switched on.
Customer service en 4Customer service Accessories When calling us, please give the product number (E no.) and the production number (FD no.) so that we can provide you with the correct advice. The rating plate with these numbers can be found inside the appliance (remove the metal mesh grease filter to gain access). You can make a note of the numbers of your appliance and the telephone number of the after-sales service in the space below to save time should it be required.
Customer service en INSTALLATION INSTRUCTIONS Installation instructions These instructions apply to several appliance variants. It is possible that individual features are described which do not apply to your appliance. ■ ■ ■ Appliance width 60 cm: This appliance is installed in a upper cabinet. Follow the enclosed installation instructions for additional special accessories (e.g. for circulating-air mode). The surfaces of the appliance are sensitive. Avoid damaging them during installation.
Important safety information (Important safety information Read these instructions carefully. Only then will you be able to operate your appliance safely and correctly. Retain the instruction manual and installation instructions for future use or for subsequent owners. The appliance can only be used safely if it is correctly installed according to the safety instructions. The installer is responsible for ensuring that the appliance works perfectly at its installation location.
en General information : Warning Risk of fire! Grease deposits in the grease filter may catch fire. The specified safety distances must be observed in order to prevent an accumulation of heat. Observe the specifications for your cooking appliance. If gas and electric hobs are operated together, the largest specified distance applies. Only one side of the appliance may be installed directly next to a high-sided unit or a wall.
General information Electrical connection : Warning Risk of electric shock! Components inside the appliance may have sharp edges. These may damage the connecting cable. Do not kink or pinch the connecting cable during installation. The required connection data can be found on the rating plate inside the appliance; to do this, remove the metal mesh grease filter. Length of the cable: approx. 1.30 m This appliance complies with the EC interference suppression regulations. en 1.
Installation en Preparing the appliance 4. Screw the four angle brackets to the appliance. Ensure that the screws are positioned correctly.ª Screw in the screws until 8 mm of the threaded section is still protruding. « A handle strip must be screwed to the filter pull-out. This handle strip can be one that is provided with the appliance, or one that is available as an accessory. 1. Use the screws provided to secure the handle strip to the filter pull-out. [ 2.
Installation 2. Measure the distance from the appliance to the wall and mark this on the filler strip. 3. If required, shorten the filler strip to the required dimension. 4. Remove the appliance and screw in the filler strip. en Change the filter pull-out's limit stop On some versions of the appliance, the limit stop for the filter pull-out can be changed. Spacers are included with these appliances in order to set the appliance's handle strip so that it is flush with the fitted unit. 1.
Constructa Neff Vertriebs-GmbH Carl-Wery-Straße 34 D-81739 München Register your product online *9001058624* www.neff-international.
