EXTRACTOR HOOD [en] Instructions for installation and use
en Table of contents [ e n ] I n s t r u c t i o n s f o r i n s t al a t i o n a n d u s e INSTRUCTION MANUAL.......................................................... 2 8 Intended use ..........................................................2 ( Important safety information ...............................3 7 Environmental protection.....................................5 Ç Operating modes...................................................5 1 Operating the appliance ......................................
Important safety information en :Warning – Danger of suffocation! Packaging material is dangerous to children. Never allow children to play with packaging material. In any case, consult your responsible Master Chimney Sweep. He is able to assess the house's entire ventilation setup and will suggest the suitable ventilation measures to you. Unrestricted operation is possible if the vapour extractor hood is operated exclusively in the circulating-air mode.
en Important safety information : Warning – Risk of injury! Causes of damage ■ Caution! Risk of damage due to corrosion. Always switch on the appliance while cooking to avoid condensation. Condensate can produce corrosion damage. Components inside the appliance may have sharp edges. Wear protective gloves. Risk of injury! ■ Items placed on the appliance may fall down. Do not place any objects on the appliance.
Environmental protection 7Environmental protection Your new appliance is particularly energy-efficient. Here you can find tips on how to save even more energy when using the appliance, and how to dispose of your appliance properly. Envi r onment al pr ot ect i on en ÇOperating modes Oper at i ng modes Exhaust air mode The air which is drawn in is cleaned by the grease filters and conveyed to the exterior by a pipe system.
en Operating the appliance 1Operating the appliance Control panel model 3 These instructions apply to several appliance variants. It is possible that individual features are described which do not apply to your appliance. Oper at i ng t he ap l i ance Note: Switch on the extractor hood when you start cooking and switch it off again several minutes after you have finished cooking. This is the most effective way of removing the kitchen fumes.
Cleaning and maintenance 2Cleaning and maintenance :Warning – Risk of burns! The appliance will become hot during operation, especially near the bulbs. Allow the appliance to cool down before cleaning. Area Glass Cl eani ng and mai nt enance Controls : Warning – Risk of electric shock! Penetrating moisture may result in an electric shock. Clean the appliance using a damp cloth only. Before cleaning, pull out the mains plug or switch off the circuit breaker in the fuse box.
en Trouble shooting Removing metal grease filter 1. Open the lock and fold down the metal grease filter. While doing this, place your other hand under the metal grease filter. 2. Take the metal grease filter out of the holder. 3Trouble shooting Malfunctions often have simple explanations. Please read the following notes before calling the after-sales service. Tr oubl e sho t i ng : Warning – Risk of electric shock! Incorrect repairs are dangerous.
Customer service Replacing bulbs These instructions apply to several appliance variants. It is possible that individual features are described which do not apply to your appliance. : Warning – Risk of burns! Halogen bulbs become very hot when switched on. There is still a risk of burning for some time after they have been switched off. Allow the halogen bulbs to cool down before replacing them. : Warning – Risk of electric shock! When changing the bulbs, the bulb socket contacts are live.
Installation instructions en INSTALLATION INSTRUCTIONS These instructions apply to several appliance variants. It is possible that individual features are described which do not apply to your appliance. Installation instructions Appliance width 60 cm: I n s t a l a t i o n i n s t r uc t i o n s ■ ■ ■ This appliance is installed in a upper cabinet. Follow the enclosed installation instructions for additional special accessories (e.g. for circulating-air mode).
Important safety information (Important safety information Read these instructions carefully. Only then will you be able to operate your appliance safely and correctly. Retain the instruction manual and installation instructions for future use or for subsequent owners. The appliance can only be used safely if it is correctly installed according to the safety instructions. The installer is responsible for ensuring that the appliance works perfectly at its installation location.
en General information : Warning – Risk of fire! Grease deposits in the grease filter may catch fire. The specified safety distances must be observed in order to prevent an accumulation of heat. Observe the specifications for your cooking appliance. If gas and electric hobs are operated together, the largest specified distance applies. Only one side of the appliance may be installed directly next to a high-sided unit or a wall.
General information Electrical connection : Warning – Risk of electric shock! Components inside the appliance may have sharp edges. These may damage the connecting cable. Do not kink or pinch the connecting cable during installation. The required connection data can be found on the rating plate inside the appliance; to do this, remove the metal mesh grease filter. Length of the cable: approx. 1.30 m This appliance complies with the EC interference suppression regulations. en 1.
Installation en Preparing the appliance 4. Screw the two angle brackets to the appliance. Ensure that the screws are positioned correctly. ª Screw in the screws until 8 mm of the threaded section is still protruding. « A handle strip must be screwed to the filter pull-out. This handle strip can be one that is provided with the appliance, or one that is available as an accessory. 1. Use the screws provided to secure the handle strip to the filter pull-out. [ 2.
Installation 2. Measure the distance from the appliance to the wall and mark this on the filler strip. 3. If required, shorten the filler strip to the required dimension. 4. Remove the appliance and screw in the filler strip. en Change the filter pull-out's limit stop On some versions of the appliance, the limit stop for the filter pull-out can be changed. Spacers are included with these appliances in order to set the appliance's handle strip so that it is flush with the fitted unit. 1.
*9001058624* 9001058624 970915 en
