User Manual

34
Switching over from exhaust air to circulating air mode
Switching the electronic control system
to circulating air mode:
❑
The extractor hood has been set to
exhaust air mode at the factory.
❑
Before the mode can be changed, the
extractor hood must have been
connected and should be switched off.
1. Press and hold down the L button.
2. Press the button for approx.
3 seconds.
❑ A
ã is displayed.
3. Release the buttons.
❑ The display goes out shortly
afterwards.
Resetting to exhaust-air mode:
1. Repeat the procedure.
❑ A
# is displayed.
2. Release the buttons.
❑ The display goes out shortly
afterwards.