Extractor hood [en] Instructions for installation and use
en Ú Table of contents [ e n ] I n s t r u c t i o n s f o r i n s t al a t i o n a n d u s e INSTRUCTION MANUAL.......................................................... 2 8 Intended use ..........................................................2 ( Important safety information ...............................3 7 Environmental protection.....................................5 Ç Operating modes...................................................5 1 Operating the appliance ....................................
Important safety information en (Important safety information :Warning – Danger of suffocation! Packaging material is dangerous to children. Never allow children to play with packaging material. I mpor t ant saf et y i nf or mat i on : Warning – Danger of death! Risk of poisoning from flue gases that are drawn back in. Always ensure adequate fresh air in the room if the appliance is being operated in exhaust air mode at the same time as room airdependent heat-producing appliance is being operated.
en Important safety information : Warning – Risk of injury! Causes of damage ■ Caution! Risk of damage due to corrosion. Always switch on the appliance while cooking to avoid condensation. Condensate can produce corrosion damage. Components inside the appliance may have sharp edges. Wear protective gloves. Risk of injury! ■ Items placed on the appliance may fall down. Do not place any objects on the appliance.
Environmental protection 7Environmental protection Your new appliance is particularly energy-efficient. Here you can find tips on how to save even more energy when using the appliance, and how to dispose of your appliance properly. Envi r onment al pr ot ect i on en ÇOperating modes Oper at i ng modes Exhaust air mode The air which is drawn in is cleaned by the grease filters and conveyed to the exterior by a pipe system.
en Operating the appliance 1Operating the appliance These instructions apply to several appliance variants. It is possible that individual features are described which do not apply to your appliance. 2Cleaning and maintenance :Warning – Risk of burns! The appliance becomes hot during operation. Allow the appliance to cool down before cleaning.
Cleaning and maintenance Area Stainless steel Cleaning products Hot soapy water: Clean with a dish cloth and then dry with a soft cloth. Clean stainless steel surfaces in the direction of the grain only. Special stainless steel cleaning products are available from our after-sales service or from specialist retailers.Apply a very thin layer of the cleaning product with a soft cloth. Painted surfaces Hot soapy water: Clean using a damp dish cloth and then dry with a soft cloth.
en Trouble shooting Installing the metal mesh grease filter : Warning – Risk of injury! Components inside the appliance may have sharp edges. Wear protective gloves. Note: Clean all accessible parts of the housing. 1. Insert the metal grease filter and lock it in place. When you do this, take hold of the metal grease filter from underneath with your other hand. Note: Make sure that the metal grease filter is positioned correctly. 2.
Customer service en 4Customer service Accessories When calling us, please give the product number (E no.) and the production number (FD no.) so that we can provide you with the correct advice. The rating plate with these numbers can be found inside the appliance (remove the metal mesh grease filter to gain access). You can make a note of the numbers of your appliance and the telephone number of the after-sales service in the space below to save time should it be required.
Installation instructions en INSTALLATION INSTRUCTIONS Installation instructions I n s t a l a t i o n i n s t r uc t i o n s PLQ PLQ PLQ PLQ PLQ PLQ PLQ PLQ 10
Important safety information en : Warning – Risk of fire! Fatty deposits in the grease filter may catch fire. The specified safety clearances must be complied with in order to prevent a buildup of heat. Refer to the information provided for your cooker. If gas and electric hobs are being operated together, the largest specified clearance applies. Risk of fire!deposits in the grease filter may ■ Grease catch fire. Never work with naked flames close to the appliance (e.g. flambéing).
en Important safety information Adequate incoming air must therefore always be ensured. ■ An incoming/exhaust air wall box alone will not ensure compliance with the limit. Safe operation is possible only when the partial vacuum in the place where the heatproducing appliance is installed does not exceed 4 Pa (0.04 mbar).
General information KGeneral information Gener al i nf or mat i on Checking the wall ■ ■ ■ ■ The wall must be level, vertical and adequately loadbearing. The depth of the bore holes must be the same length as the screws. The wall plugs must have a secure grip. The enclosed screws and wall plugs are suitable for solid brickwork. Suitable fasteners must be used for other structures (e.g. plasterboard, porous concrete, poroton bricks). The maximum weight of the extractor hood is 40 kg.
Installation en $ $ [ [ % % & ! ! $ ! ! Installation 1. Attaching and aligning the appliance. 2. Mark the hole for the safety screw. © 3. Remove the appliance once more.
Installation Finishing installation of the appliance 1. Drill an 8mm Øhole to a depth of 80mm for the safety screw and press the wall plug flush into the wall. ¨ 2. First remove the protective foil from the back of the appliance and, following installation, remove the foil completely. 3. Connect the appliance. © 4. Screw in the safety screw - and washer - and tighten all the screws. ª % $ & Exhaust duct en Connect the power supply 1. Plug the mains plug into the earthed socket. 2.
&RQVWUXFWD 1HII 9HUWULHEV *PE+ &DUO :HU\ 6WUDH ' 0QFKHQ Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom 5HJLVWHU \RXU SURGXFW RQOLQH ZZZ QHII LQWHUQDWLRQDO FRP *9001272153* 9001272153 970810 en
