Extractor hood [en] Instructions for installation and use
en Ú Table of contents INSTRUCTION MANUAL.......................................................... 2 s no i t c u r t s n I ] ne [ rof 8 Intended use................................................................... 2 ( Important safety information ........................................ 3 7 Environmental protection ............................................. 5 Ç Operating modes ........................................................... 5 1 Operating the appliance..................................
Important safety information en (Important safety information : Warning no i t amro f n i y t e f as t na t ropmI Danger of suffocation! Packaging material is dangerous to children. Never allow children to play with packaging material. : Warning Danger of death! Risk of poisoning from flue gases that are drawn back in. Always ensure adequate fresh air in the room if the appliance is being operated in exhaust air mode at the same time as room airdependent heat-producing appliance is being operated.
en Important safety information : Warning Risk of burns! The accessible parts become very hot when in operation. Never touch hot parts. Keep children at a safe distance. : Warning Risk of injury! ■ Components inside the appliance may have sharp edges. Wear protective gloves. Risk of injury! ■ Items placed on the appliance may fall down. Do not place any objects on the appliance. Risk of injury! ■ The light emitted by LED lights is very dazzling, and can damage the eyes (risk group 1).
Environmental protection 7Environmental protection Environmentally-friendly disposal no i t ce t orp l a t nemnor i vnE Dispose of packaging in an environmentally-friendly manner. This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.
en Operating the appliance AirFresh function Setting the fan Press the - button until 3‚ appears. The fan runs for approx. five minutes per hour. Switching on the appliance If you want to end the AirFresh function, press the # button. The lighting can be switched on and off independently of the fan. Press the A button. Setting the brightness Press and hold the A button until the desired brightness is reached.
Cleaning and maintenance en Saturation display Cleaning agents When the metal mesh grease filters or the activated carbon filter are saturated, a signal sounds for approx. 4 seconds after the fan is switched off. In addition, this symbol is indicated on the display: ª Observe the information in the table to ensure that the different surfaces are not damaged by using the wrong type of cleaning agent. Do not use If you have not yet done so, the metal mesh grease filters should be cleaned now.
en Cleaning and maintenance Cleaning the metal mesh grease filters Removing metal grease filter These instructions apply to several appliance variants. It is possible that individual features are described which do not apply to your appliance. 1. Open the lock and fold down the metal grease filter. : Warning While doing this, place the other hand under the metal grease filter. 2. Take the metal grease filter out of the holder. Risk of fire! Grease deposits in the grease filter may catch fire.
Trouble shooting 3Trouble shooting Malfunctions often have simple explanations. Please read the following notes before calling the after-sales service. gn i t o h s e l buo r T : Warning Risk of electric shock! Incorrect repairs are dangerous. Repairs may only be carried out and damaged power cables replaced by one of our trained after-sales technicians. If the appliance is defective, unplug the appliance from the mains or switch off the circuit breaker in the fuse box. Contact the after-sales service.
en Customer service 4Customer service Basic equipment: Starter set for circulating-air mode wide When calling us, please give the product number (E no.) and the production number (FD no.) so that we can provide you with the correct advice. The rating plate with these numbers can be found inside the appliance (remove the metal mesh grease filter to gain access).
Important safety information en INSTALLATION INSTRUCTIONS (Important safety information Installation instructions PLQ PP PD[ PP PLQ PP PP PLQ PP ! PP ! PP Read these instructions carefully. Only then will you be able to operate your appliance safely and correctly. Retain the instruction manual and installation instructions for future use or for subsequent owners.
en Important safety information : Warning Danger of death! Risk of poisoning from flue gases that are drawn back in. Always ensure adequate fresh air in the room if the appliance is being operated in exhaust air mode at the same time as room airdependent heat-producing appliance is being operated. Room air-dependent heat-producing appliances (e.g.
General information : Warning Risk of electric shock! It must always be possible to disconnect the appliance from the electricity supply. The appliance must only be connected to a protective contact socket which has been correctly installed. If the plug is no longer accessible following installation of the appliance, or a fixed connection is required, an all-pole isolating switch must be present on the installation side with a contact gap of at least 3 mm.
en Installation 5Installation Preparing the installation no i t a l a t s n I Caution! Ensure that there are no electric wires, gas or water pipes in the area where holes are to be made. Installation 1. Screw on the fixing bracket for the flue duct. ¨ $ 1. Mark a vertical centre line on the wall from the ceiling to the lower edge of the extractor hood. 2. Mark positions for the screws and the contour of the attachment area. 3.
Installation Attaching and aligning the appliance Connecting the pipes 1. First, remove the protective foil from the back of the Note: If using an aluminium pipe, smooth the connection area beforehand. appliance and, following installation, remove the foil completely. 2. When attaching the appliance, ensure that it engages firmly with the brackets. « 3. Align the appliance horizontally by turning the brackets. If required, the appliance can be moved to the right or left.
Constructa Neff Vertriebs-GmbH Carl-Wery-Straße 34 D-81739 München Register your product online *9001028149* www.neff-international.
