Operation Manual

6
Remove the lters one by one.
Filters and maintenance
Any kind of bending of the lters has to be
avoided when washing them. Before tting
them again into the hood make sure that they
are completely dry. (The colour of the lter sur-
face may change throughout the time but this
has no inuence to the lter efciency).
Put the clean lters back on the Grid in its place
Hook the security chain and put back the Grid
onto the hood.
A
B
Activated carbon lter:
For neutralizing odours in recirculating mode.
Caution:
As the lter becomes more and more saturated with
grease, there is an increased risk of re and the
function of the hood may be impaired.
Important:
Change the activated carbon lter promptly to pre-
vent the risk of re from the accumulation of heat
when deep-fat frying or roasting.
These lters are not washable and cannot be regen-
erated, and must be replaced approximately every
year of operation, or more frequently with heavy
usage.
Replacing the activated carbon lter
Unhook the lter-holding Grid (see “Removing
and inserting metal self- supporting grease
lters”)
Remove the saturated activated carbon lter as
shown (A).
Fit the new lters (B). Filter can be ordered at
the customer service
Filters and maintenance
Hook the lter-holding Grid (see “Removing
and inserting metal self- supporting grease
lters”)
Disposal of the old activated carbon lter:
Activated carbon lters do not contain any
harmful substances. They can be disposed of
as residual waste.