Installation Instruction
en Installation
16
Fitting the lower support frame
Fasten the upper and lower part of the support frame at
the specified total height using 10 screws.
Notes
■ Ensure that the lower support frame is in the correct
position. The open side must be facing the hob
control elements.
■ The support frame can be subsequently
re-positioned by loosening the securing screws.
Fitting the appliance
1. Hook the appliance from below into the support
frame.
Note: Ensure that the mains cable is not trapped.
2. Fasten the appliance to the support frame
using 2 securing screws.
3. Hook in the retaining clip and screw tight.
([KDXVWDLU
PP
&LUFXODWHGDLU
PP
[
[
[