Home Connect Guide
12 EN
Step 2.2: Connecting the extractor hood
to your home network, step by step
Follow the instructions in Step 2.2 only if the app tells
you to. The following steps set out how to perform this
operation on the appliance itself.
Note:
To connect the extractor hood to your home
network, the hood and the light must be switched
off. You can cancel the process at any time by
pressing
.
1 | Press and hold the
D
symbol on your remote control until
LED 7 on the appliance starts ashing.
2 | Press the + button on your remote control twice to start
manual login to your home network.
LED 2 and LED 7 ash on the appliance.
The appliance will open a temporary Wi-Fi network,
"HomeConnect", for a few minutes with the password
"HomeConnect".
Using this temporary Wi-Fi network, the app will
transfer the name (SSID) and the password of
your home network to the extractor hood, thereby
enabling the extractor hood to connect to your
home network.
If connection to the home network is successful, LED 3 and
LED 7 ash on the appliance.
3 | Follow the instructions in the app.
Information:
For some appliances the step-by-step mode is also
called "SAP mode" or "manual mode".
If the step-by-step mode does not work please
check:
- Your appliance is in the range of the Wi-Fi network.
- Your smartphone/tablet is connected to your
home Wi-Fi network.
- Your smartphone/tablet and appliance are
connected to the same home Wi-Fi network.