Extractor hood [en] User manual and installation instructions I88WMM1S7, I98WMM1S7, I98WMM1S1B, I98WMM1S7B, I88WMM1S7B 2
en Safety Table of contents USER MANUAL 1 Safety .................................................................... 2 2 Avoiding material damage................................... 4 3 Environmental protection and saving energy ....................................................................... 5 4 Operating modes ................................................. 5 5 Familiarising yourself with your appliance ........ 6 6 Before using for the first time .............................
Safety Children may breathe in or swallow small parts, causing them to suffocate. ▶ Keep small parts away from children. ▶ Do not let children play with small parts. WARNING ‒ Risk of poisoning! Risk of poisoning from flue gases being drawn back in. Room-air-dependent heat-producing appliances (e.g.
en Avoiding material damage WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains. ▶ If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box. ▶ Call customer services. → Page 13 Incorrect repairs are dangerous.
Environmental protection and saving energy en 3 Environmental protection and saving energy 3.1 Disposing of packaging The packaging materials are environmentally compatible and can be recycled. ▶ Sort the individual components by type and dispose of them separately. 3.2 Saving energy If you follow these instructions, your appliance will use less power. Adjust the fan speed to the amount of steam produced during cooking. ¡ The lower the fan speed, the less energy is consumed.
en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance 5.1 Controls You can use the control panel to configure all functions of your appliance and to obtain information about the operating status.
Basic operation en 7.4 Switching on intensive mode 7.10 Sensor control1 If particularly strong odours or vapours develop, you can use intensive mode. 1. Press repeatedly until LED 4 lights up in the LED display for intensive mode 1. 2. Press repeatedly until LED 5 lights up in the LED display for intensive mode 2. a After approx. 6 minutes, the appliance automatically switches to fan setting 3. In automatic mode, a sensor in the appliance detects the intensity of the cooking and roasting fumes.
en Home Connect 7.14 Switching on Ambient Light1 7.15 Switching on Guided Air Notes ¡ You can switch the Ambient Light on and off in the Home Connect app. ¡ Additional colours are available in the Home Connect app. With the Guided Air function, the cooking vapour is routed in such a way that it can be optimally collected from the appliance and removed. The extraction of the cooking vapour is improved on front cooking zones in particular. Note: This function is switched off by default. ▶ Press .
Hob-based hood control Notes ¡ You can continue to use your appliance as normal while updates are downloading. Depending on your personal settings in the app, software updates can also be set to download automatically. ¡ We recommend that you install security updates as soon as possible. 8.
en Cleaning and servicing 10 Cleaning and servicing To keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully. 10.1 Cleaning products You can obtain suitable cleaning products from aftersales service or the online shop. ATTENTION! Unsuitable cleaning products may damage the surfaces of the appliance. ▶ Do not use harsh or abrasive detergents. ▶ Do not use cleaning products with a high alcohol content. ▶ Do not use hard scouring pads or cleaning sponges.
Cleaning and servicing en 10.5 Cleaning the drip tray 10.7 Cleaning grease filters manually When cooking or cleaning the appliance, liquid may get into the appliance. The drip trays are used to collect this liquid. 1. Remove the drip tray and empty it . The grease filters filter the grease from the cooking vapour. Regularly cleaned grease filters guarantee a high level of grease removal. We recommend cleaning the grease filters every two months.
en Troubleshooting 10.10 Fitting the grease filters 1. Press . a The glass panel moves halfway down and the grease filter cartridges are transported to the top. 2. Note: The appliance frame is sensitive. Remove the grease filter cartridges vertically. Do not pull the grease filter cartridges over the appliance frame. Remove the grease filter cartridges. 3. Insert the grease filter into the grease filter cart- ridges. To avoid causing damage, do not bend the grease filters. 4.
Customer Service Fault The appliance flap does not close completely. The button illumination does not work. The lighting does not work1. The top two LEDs flash in the left-hand control panel (7). The bottom two LEDs flash in the left-hand control panel (6). HomeConnect is not working correctly. en Cause and troubleshooting An object is jammed in the appliance. ▶ Disconnect the appliance from the electricity. ▶ Carefully open the flap and remove the object that has become jammed.
en Disposal Accessories Clean Air Plus odour filter – 80 cm + 90 cm, replacement Clean Air Plus recirculation kit – 80 cm Clean Air Plus recirculation kit – 90 cm Long Life recirculation kit – 80 cm Long Life recirculation kit – 90 cm Installation kit for removable fans Installation kit for seamless installation – 80 cm Order number Z92WWB1X6 Z92WWI1X6 Z92WWI1X7 Z92WWJ11 Z92WWJ12 Z92WWM11 Z92WWY8X2 Accessories Installation kit for seamless installation – 90 cm Flat duct piece – straight, 1000 mm Flat du
Test information BE FR MT SE 5 GHz WLAN (Wi-Fi): BG HR NL NO For indoor CZ IT AT CH use only. DK CY PL TR AL BA MD 5 GHz WLAN (Wi-Fi): For indoor use only. ME DE LI PT IS EE LV RO UK (NI) MK RS IE LT SI EL LU SK UK en ES HU FI UA 16 Test information This information has been produced to facilitate the inspection of the appliance. ¡ Measured in accordance with EN 61591. ¡ The appliance is operated in its as-delivered condition. ¡ The fan box must be attached on the front of the appliance.
en Installation instructions 17.2 Appliance dimensions You will find the dimensions of the appliance here Observe the dimensions of the unit. 17.3 Secure installation Follow these safety instructions when installing the appliance. WARNING ‒ Risk of poisoning! Risk of poisoning from flue gases being drawn back in. Room-air-dependent heat-producing appliances (e.g.
Installation instructions Risk of poisoning from flue gases being drawn back in. ▶ If an extractor hood with an open-flued heat production source is installed, the power supply for the extractor hood must be provided with a suitable safety switch. Risk of poisoning from flue gases being drawn back in. ▶ Do not emit the exhaust air into a smoke or exhaust gas flue that is in operation. ▶ Do not emit the exhaust air into a shaft that is used to ventilate installation rooms for heat-producing appliances.
en Installation instructions Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating current only via a properly installed socket with earthing. ▶ The protective conductor system of the domestic electrical installation must be properly installed. ▶ Never equip the appliance with an external switching device, e.g. a timer or remote control.
Installation instructions ¡ To prevent condensate from returning, fit the exhaust pipe with a 1° gradient from the appliance. Note: Suitable air extraction ducts are available from our after-sales service, your dealer or on our website. en 1. Make a cut-out in the worktop, depending on the in- stallation position. Flat ducts Use flat ducts with an inner cross-section that corresponds to the diameter of the round pipes: ¡ Diameter of 150 mm corresponds to approx. 177 cm².
en Installation instructions 3. Screw the covering plate in tightly, depending on the installation situation. Attach the exhaust air hose for the fan box to the connector. ‒ Slide the fan box into the guide and tighten this with a screw. ‒ Mark the position of the pipework on the bottom of the unit. ‒ Undo the screw and remove the fan box again. 5. Saw out the cut-out for the pipework. ‒ Installing the appliance WARNING ‒ Risk of injury! Components inside the appliance may have sharp edges.
Installation instructions 10. Screw the rails onto the bottom of the unit. 14. Plug the cables into the fan box. 11. Note: If an appliance with the dimension 90 cm is 15. Carefully insert the glass pane as far as it will go installed in a unit with a width of 90 cm, skip the next two installation steps and follow the instructions in the additional accessory pack. Screw in the screw from below and tighten the nut. 12. Align the appliance to the hob against the worktop and tension it .
Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd.
