User's Manual
Table Of Contents
- Extractor hood
- en
- Table of contents
- 1 Safety
- 2 Avoiding material damage
- 3 Environmental protection and saving energy
- 4 Operating modes
- 5 Familiarising yourself with your appliance
- 6 Before using for the first time
- 7 Basic operation
- 7.1 Switching on the appliance
- 7.2 Switching off the appliance
- 7.3 Selecting a fan setting
- 7.4 Switching on intensive mode
- 7.5 Switching off intensive mode
- 7.6 Switching on the fan run-on
- 7.7 Switching on automatic mode
- 7.8 Switching off automatic mode
- 7.9 Intermittent ventilation
- 7.10 Sensor control
- 7.11 Setting the sensor control
- 7.12 Setting the saturation indicator
- 7.13 Resetting the saturation indicator
- 7.14 Switching on Ambient Light
- 7.15 Switching on Guided Air
- 7.16 Switching off Guided Air
- 8 Home Connect
- 9 Hob-based hood control
- 10 Cleaning and servicing
- 10.1 Cleaning products
- 10.2 Cleaning the appliance
- 10.3 Cleaning controls
- 10.4 Cleaning the glass panel
- 10.5 Cleaning the drip tray
- 10.6 Removing the grease filter
- 10.7 Cleaning grease filters manually
- 10.8 Cleaning grease filters in the dishwasher
- 10.9 Cleaning the grease filter cartridge
- 10.10 Fitting the grease filters
- 11 Troubleshooting
- 12 Customer Service
- 13 Accessories
- 14 Disposal
- 15 Declaration of Conformity
- 16 Test information
- 17 Installation instructions
Test information en
15
BE BG CZ DK DE EE IE EL ES
FR HR IT CY LI LV LT LU HU
MT NL AT PL PT RO SI SK FI
SE NO CH TR IS UK (NI)
5GHz WLAN (Wi-Fi): For indoor use only.
AL BA MD ME MK RS UK UA
5GHz WLAN (Wi-Fi): For indoor use only.
16 Test information
This information has been produced to facilitate the in-
spection of the appliance.
¡ Measured in accordance with EN 61591.
¡ The appliance is operated in its as-delivered condi-
tion.
¡ The fan box must be attached on the front of the ap-
pliance.
¡ Ensure that the filters do not move during the meas-
urement (by changing the appliance position to the
installation position).
¡ The ambient light is not a working light. The ambient
light in light colour red has been added to the FDE
value as a power consumer.
17 Installation instructions
Observe this information when installing the appliance.
17.1 Included with the appliance
After unpacking all parts, check for any damage in
transit and completeness of the delivery.