Manual

Cleaning and care
21
Isolate the extractor hood by pulling
out the mains plug or switching off the
fuse.
Do not clean the extractor hood with
abrasive sponges or with cleaning agents
which contain sand, soda, acid or chlorine.
 Clean the extractor hood with a hot
soap solution or a mild window
cleaner.
 Do not scrape off dried-on dirt but
wipe off with a damp cloth.
 When clearing the grease filters,
remove grease deposits from
accessibile parts of the housing. This
prevents the risk of fire and ensures
that the extractor hood continues
operating at maximum efficiency.
 Note: do not use alcohol (spirit) on
plastic surfances, as dull marks may
appear.
Caution! Ensure that kitchen is
adequately ventilated. Avoid naked
flames.
Clean the operating buttons with a
mild soapy solution and soft, damp cloth
only.
Do not use stainless-steel cleaner to clean
the operating buttons.
Stainless Steel surfances:
 Use a mild non abrasive stainless
steel cleaner.
 Clean the surface in the same
direction a sit has been ground and
polished.
Aluminium and plastic surfaces:
 Do not use dry cloths.
 Use a mild window cleaning agent.
 Do not use aggressive, acid or caustic
cleaners.
Observe the warranty regulations in the
enclosed service booklet.