Instruction Manual

en Troubleshooting
34
Troubleshooting
Troubleshooting
Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
Malfunctions
Fault Cause Troubleshooting
The LED lighting does not
work.
The illuminant is defective. 1. "Switch off the appliance."
→Page30
2. Disconnect the appliance from the
mains.
Unplug the appliance from the
mains or switch off the circuit
breaker in the fuse box.
3. Slide the illuminant cover back-
wards and remove the illuminant
cover to the left ⁠.
→Fig.
7
4. Replace the illuminant.
Replacement illuminant: 220–240
V AC, E14 bulb holder, see the de-
fective illuminant's wattage.
The light switch is jammed.
▶
Check whether the light switch can
be moved.
→Fig.
8
The temperature differs
greatly from the setting.
Different causes are pos-
sible.
1. "Switch off the appliance."
→Page30
2. "Switch the appliance back on after
fiveminutes." →Page30
‒ If the temperature is too
warm, check the temperature
again after a couple of hours.
‒ If the temperature is too cold,
check the temperature again
on the following day.
The base of the refrigerator
compartment is wet.
The condensation channel
or drainage hole are
blocked.
▶
"Clean the condensation channel
and the drainage hole." →Page33