Instructions for Use

en
20
■ Remove blackboard chalk with clean
water and a sponge or lint-free cloth.
When doing so, only apply light
pressure.
■ Remove fingerprints and other greasy
marks with glass cleaner and a soft,
dry cloth.
■ Remove stubborn marks with solvents
such as spirit or cleaning solvent and
a soft, dry cloth.
Interior fittings
All variable parts of the appliance
can be taken out for cleaning.
Take out shelves in the door
Fig. #
Lift shelves upwards and take out.
Take out glass shelves
Pull the glass shelves forwards and take
out.
Removing the container
Fig. )
Pull out the container all the way, lift at
the front and remove.
Taking out the frozen food container
Fig. *
Pull out the frozen food container all
the way, lift at the front and remove.
Taking out glass shelf above vegetable
container
Fig. +
The glass shelf can be taken out and
disassembled for cleaning.
Note
Before taking out the glass shelf, pull out
vegetable container.
Light (LED)
Your appliance features a maintenance-
free LED light.
These lights may be repaired
by customer service or authorised
technicians only.
Tips for saving energy
■ Install the appliance in a dry, well
ventilated room! The appliance should
not be installed in direct sunlight
or near a heat source (e.g. radiator,
cooker).
If required, use an insulating plate.
■ Allow warm food and drinks to cool
down before placing in the appliance.
■ Thaw frozen food in the refrigerator
compartment and use the low
temperature of the frozen food to cool
refrigerated food.
■ Open the appliance as briefly as
possible.
■ To achieve the lowest energy
consumption, leave a small wall gap
at the side.
■ The arrangement of the fittings does
not affect the energy rating of the
appliance.