en Instruction for Use KI18..
en Table of Contents Safety and warning information ............ Information concerning disposal .......... Scope of delivery .................................... Room temperature, ventilation and cavity depth ...................................... Installation location ................................. Connecting the appliance ..................... Getting to know your appliance ........... Switching on the appliance ................... Setting the temperature ......................... Alarm function .....
en enTable of ContentsenInstucr oit nforUse Safety and warning information Before you switch ON the appliance Please read the operating and installation instructions carefully! They contain important information on how to install, use and maintain the appliance. The manufacturer is not liable if you fail to comply with the instructions and warnings. Retain all documents for subsequent use or for the next owner.
en Important information when using the appliance ■ Never use electrical appliances inside the appliance (e.g. heater, electric ice maker, etc.). Risk of explosion! ■ Never use a steam cleaner to defrost or clean the appliance! The steam may penetrate electrical parts and cause a short-circuit. Risk of electric shock! Do not use pointed or sharp-edged implements to remove frost or layers of ice. You could damage the refrigerant tubing. Leaking refrigerant may ignite or cause eye injuries.
en Information concerning disposal * Disposal of packaging The packaging protects your appliance from damage during transit. All utilised materials are environmentally safe and recyclable. Please help us by disposing of the packaging in an environmentally friendly manner. Please ask your dealer or inquire at your local authority about current means of disposal. * Disposal of your old appliance Old appliances are not worthless rubbish! Valuable raw materials can be reclaimed by recycling old appliances.
en Room temperature, ventilation and cavity depth Cavity depth A cavity depth of 560 mm is recommended for the appliance. If the cavity depth is smaller – at least 550 mm – the energy consumption increases slightly. Ambient temperature The appliance is designed for a specific climate class. Depending on the climate class, the appliance can be operated at the following temperatures. The climate class can be found on the rating plate. Fig. .
en Connecting the appliance After installing the appliance, wait at least 1 hour until the appliance is switched on. During transportation the oil in the compressor may have flowed into the refrigeration system. Before switching on the appliance for the first time, clean the interior of the appliance (see chapter “Cleaning the appliance”). Electrical connection The socket must be near the appliance and also freely accessible following installation of the appliance.
en Controls Fig. 2 1 2 3 4 5 On/Off button Serves to switch the appliance on and off. “super” button Is used to switch on the super cooling (see chapter entitled “Super cooling”). Temperature selection button Press this button to set the temperature. Temperature display The numbers correspond to the set refrigerator compartment temperatures in °C. Alarm button Used to switch off the warning signal, see chapter “Alarm function”. Switching on the appliance Fig.
en Setting the temperature Refrigerator compartment Fig. 2 The refrigerator compartment is the ideal storage location for meat, sausage, fish, dairy products, eggs, ready meals and pastries. Refrigerator compartment The temperature can be set from +2 °C to +8 °C. Keep pressing temperature setting button 3 until the required refrigerator compartment temperature is set. The value last selected is saved. The set temperature is indicated on temperature display 4.
en Note the chill zones in the refrigerator compartment Vegetable container with humidity controller The air circulation in the refrigerator compartment creates different chill zones: The vegetable container is the optimum storage location for fresh fruit and vegetables. A humidity controller and a special seal can be used to adjust the air humidity in the vegetable container. This allows fresh fruit and vegetables to be stored twice as long as with conventional storage.
en Super cooling Interior fittings Super cooling sets the refrigerator temperature to the coldest temperature setting for approx. 15 hours. Then the appliance automatically switches to the temperature set prior to super cooling mode. Switch on super cooling mode, e.g. (not all models) ■ ■ before placing large quantities of food in the refrigerator compartment. for the fast cooling of drinks. Switching on and off Fig. 2 Press “super” button 2. The button is lit when super cooling is switched on.
en Sticker “OK” Cleaning the appliance (not all models) The “OK” temperature monitor can be used to determine temperatures below +4 °C. Gradually reduce the temperature if the sticker does not indicate “OK”. ã=Caution Note When the appliance is switched on, it may take 12 hours until the temperature is reached. Correct setting Switching off and disconnecting the appliance Switching off the appliance Fig. 2 Press the On/Off button 1. Temperature display goes out, refrigerating unit switches off.
en Interior fittings All variable parts of the appliance can be taken out for cleaning. Take out glass shelves Fig. 6 To do this, pull out shelf, lift at the front and take out. Taking out extendable glass shelf Fig. 7 Press levers on the underside on both sides, pull forwards glass shelf, lower and swivel out to the side. Take out shelves in the door Fig. + Lift shelves upwards and take out. Condensation channel Fig.
en Tips for saving energy ■ ■ ■ ■ ■ ■ ■ Install the appliance in a dry, well ventilated room! The appliance should not be installed in direct sunlight or near a heat source (e.g. radiator, cooker). If required, use an insulating plate. Select 560 mm cavity depth. A smaller cavity depth will result in a higher energy consumption. Allow warm food and drinks to cool down before placing in the appliance.
en Eliminating minor faults yourself Before you call customer service: Please check whether you can eliminate the fault yourself based on the following information. Customer service will charge you for advice – even if the appliance is still under guarantee! Fault Possible cause Temperature differs greatly from the set value. Remedial action In some cases it is adequate to switch off the appliance for 5 minutes.
en Fault Possible cause Remedial action Bottom of the refrigerator compartment is wet. The condensation channel or drainage hole are blocked. Clean the condensation channel and the drainage hole. See chapter Cleaning the appliance. Fig. 3 The refrigerating unit is switching on more frequently and for longer. Appliance opened frequently. Do not open the appliance unnecessarily. The ventilation openings have been covered. Remove obstacles.
en Appliance self-test Customer service Your appliance features an automatic self-test program which shows you sources of faults which may be repaired by customer service only. Your local customer service can be found in the telephone directory or in the customer-service index. Please provide customer service with the appliance product number (E-Nr.) and production number (FD). These specifications can be found on the rating plate. Fig. .
1-5 Alarm °C Super 6 12 7 13 8 9 14 10 11 1 Alarm 5 2 Super 4 3 2 1
3 4 5 6 7 8
9 * + , -
.
Constructa-Neff Vertriebs-GmbH Carl-Wery-Str.
