Instructions for Use

en operation
16
1. Fill the ice cube tray with drinking
water up to ¾ and place in the
freezer compartment.
If the ice cube tray is stuck to the
freezer compartment, loosen it with
a blunt implement only (e.g. spoon
handle).
2. To loosen the ice cubes, twist the
ice cube tray slightly or hold it
briefly under flowing water.
operation
7 Basic operation
operation
7.1 Switching on the appli-
ance
1. Press .
a The appliance begins to cool.
2. Set the required temperature.
→Page16
7.2 Operating tips
¡ Once you have switched on the
appliance, the set temperature is
only reached after several hours.
Do not put any food in the appli-
ance until the set temperature has
been reached.
¡ When you close the door, a va-
cuum may be created. The door is
then difficult to open again. Wait a
moment until the vacuum is offset.
7.3 Switching off the appli-
ance
▶
Press .
7.4 Setting the temperature
Setting the refrigerator
compartment temperature
▶
Press / repeatedly until the tem-
perature display shows the re-
quired temperature.
The recommended temperature in
the refrigerator compartment is
4°C.
→""OK" sticker", Page18
Setting the freezer compartment
temperature
▶
In order to set the freezer compart-
ment temperature, change the re-
frigerator compartment temperat-
ure →Page16.
The refrigerator compartment tem-
perature influences freezer com-
partment temperature. Refrigerator
compartment temperatures that
are set to warm generate warmer
freezer compartment temperatures.
8 Additional functions
8.1 Super function
With the Super function, the refriger-
ator compartment and the freezer
compartment cool more intensively.
Switch on the Super function 4 to
6hours before placing food weighing
2kg or more.
In order to utilise the freezing capa-
city, use the Super function.
→"Freezing capacity", Page18
Note:When the Super function is
switched on, increased noise may
occur.