TUMBLE DRYER en Installation and operating instructions R8580X3GB
Your new tumble dryer Display rules You have opted for a tumble dryer manufactured by Neff. : Warning! Please take a few minutes to read and become familiar with the advantages of your tumble dryer. To meet the high quality demands required by Neff, every tumble dryer that leaves our factory is carefully checked to ensure that it functions correctly and is in perfect condition. For more information on our products, accessories, replacement parts and services, see our website www.neff.
en Contents enI stal tionandoperatinginstructions 8 Intended use. . . . . . . . . . . . . . . . .4 ( Safety instructions . . . . . . . . . . .4 Children/people/pets . Installation. . . . . . . . . . Operation . . . . . . . . . . Cleaning/Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..4 ..6 ..8 . 10 7 Environmental protection . . . . .12 Packaging/old appliance . . . . . . . . . 12 Energy-saving tips. . . . . . . . . . . . . . .
en Intended use 8 Intended use ■ Intedus ■ ■ ■ This appliance is intended for private domestic use only. Do not install or operate this appliance anywhere that is liable to experience frost and/or outdoor conditions. There is a risk that the appliance will be damaged if residual water in it freezes. If hoses freeze up, they may crack/burst.
Safety instructions ■ ■ ■ Do not allow children to clean or maintain this appliance unsupervised. Keep children under 3 years and pets away from this appliance. Do not leave the appliance unattended when children or other people who are unable to assess the risks are in the vicinity. : Warning Risk of death! Children may lock themselves inside appliances and find themselves in a life-threatening situation.
en Safety instructions Installation ■ : Warning Risk of electric shock/fire/ material damage/damage to the appliance! If the appliance is not installed properly, this may lead to a dangerous situation. Ensure the following: ■ ■ ■ ■ 6 The mains voltage on your power socket must match the rated voltage specified on the appliance (identification plate). The connected loads and the required fuse protection are specified on the identification plate.
Safety instructions : Warning Risk of fire/material damage/ damage to the appliance! The use of extension cords or power strips may result in fire due to overheating or short circuiting. Connect the appliance directly to an earthed socket that has been correctly installed. Do not use extension cords, power strips or multi-way couplers.
en Safety instructions : Warning Risk of injury! ■ The appliance is very heavy. Lifting it may result in injury. Do not lift the appliance on your own. Risk of inThe jury! ■ appliance has sharp edges on which you could cut your hands. Do not take hold of the appliance by its sharp edges. Wear protective gloves to lift it. Risk of inIfjury! the hoses and mains ■ cables are not correctly routed, they may constitute a tripping hazard, which may result in injury.
Safety instructions : Warning Risk of fire/material damage/ damage to the appliance! If a program is terminated before the drying cycle has finished, this prevents the laundry from cooling down sufficiently and may cause the laundry to ignite, or may result in material damage or damage to the appliance. ■ ■ During the last part of the drying cycle, the laundry in the drum is not heated (cooling cycle). This is to ensure that it remains at a temperature at which it will not be damaged.
en Safety instructions Caution! Material damage/damage to the appliance ■ If the amount of laundry in the appliance exceeds its maximum load capacity, it may not be able to operate properly, or this may result in material damage or damage to the appliance. Do not exceed the maximum load capacity of dry laundry. Make sure you comply with the maximum load capacities specified for each of the programs. ~ Page 22 Materi damage/damage the appliance ■ alIf you tooperate the appliance without a fluff catcher (e.
Safety instructions ■ ■ ■ ■ When removing the mains plug from the socket, always take hold of the plug itself and never the mains cable, otherwise this may damage the mains cable. Do not make any technical modifications to the appliance or its features. Repairs and any other work on the appliance must only be conducted by our customer service or by an electrician. The same applies for replacing the mains cable (when necessary). Spare mains cables can be ordered from our customer service.
en Environmental protection 7 Environmental protection Energy-saving tips ■ Packaging/old appliance Enviromentalprotecion ) 12 Dispose of packaging in an environmentally-responsible manner. This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment - WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.
Installation and connection 5 Installation and connection Scope of delivery Instal ionadcetion ■ ■ ■ ■ Dryer Installation and operating instructions Basket for woollens* Condensation drain* Installing and connecting the dryer : Warning Risk of death! There is a risk of electric shock as the dryer is operated with electricity. ■ Check the dryer for visible damage. You must not operate the dryer if it is damaged.
en Installation and connection Optional accessories Transport and frost protection Order optional accessories* from the after-sales service: To empty the condensate container: ■ ■ ■ * 14 Washer-dryer stack connection set: To save space, the dryer can be placed on top of a suitable washing machine of the same width and depth. The dryer must be fastened to the washing machine using this connection set. Order number with pull-out worktop: WTZ11400; Order number without pull-out worktop: WTZ20410.
Draining the condensation water en ΠDraining the 4. Place the condensation hose in the "parked" position. Condensation will form in the appliance as it dries the laundry. You must ensure that the drain hose is connected when you operate the appliance. If there is no drain hose connected to the appliance, the condensation water from the appliance will run into the condensation container.
en Draining the condensation water 6. Fasten the other end of the drain hose with the remaining accessories, depending on the connection situation (A, B or C). & $ & % PD[ FP $ & PD[ FP $ PLQ FP PD[ FP Caution! Accumulated water can be drawn back into the dryer and may cause material damage. Check that the water drains away from the wash basin quickly. The drain must not be sealed or blocked. Caution! Material damage due to leaks or draining water.
The main points in brief en Y The main points in brief Themainpotsinbref 1 @ Load the laundry and close the door. -------- 2 @ Switch on the dryer. @ Select the start button A. -------- 3 @ Dry. @ Switch off the dryer. Select a programme and, if necessary, adjust the programme default settings. Unload the laundry. @ Empty the condensate container. Clean the fluff filter.
en Getting to know your appliance * Getting to know your appliance Dryer Getingtoknwyuraplince 3 # + ; ( 0 8 @ H P X 18 Condensate container Control and display panel Drum interior light (depending on the model) Dryer door Air inlet Fluff filter Heat exchanger
Getting to know your appliance en Control panel + VHF # ( Use the programme selector to switch the dryer on and off and to select the programme. 0 Programmes ~ Page 22. 8 Start button for starting or interrupting the programme ~ Page 24. @ Buttons ~ Page 24. H Display panel with buttons ~ Page 20.
en Getting to know your appliance Display panel Buttons in the display panel Display panel È #+3; ( 0 8 @ H P X Select the degree of dryness. Select the drying time. Select the Ready in time. Select Anti-Crease. Select Low-Heat Drying. Switch the signal on or off. Select Start/Pause. For a detailed description of all buttons, see ~ Page 24 onwards. 20 "Anti-Crease" selected. Fine adjustment of the dryness level. 5 Time programme selected. ñ "Ready in" time selected. E Childproof lock selected.
Laundry Z Laundry Preparing the laundry Laundry : Warning Risk of explosion/fire! Remove any cigarette lighters and matches from pockets. Caution! The dryer drum and fabrics could be damaged. Remove all objects from pockets and observe the following information: ■ Tie cloth belts, apron strings, etc. together or use a laundry bag. ■ Close zips, hooks and eyelets and buttons. Button up large items of laundry, such as covers. ■ Remove any metal objects, such as paper clips, from pockets.
en Programmes and buttons / Programmes and buttons Programmes Progamesndbutos Programme and fabrics Maximum load and programme settings/info Name of the programme Which fabrics is the programme suitable for? The maximum load is based on the dry weight of the fabrics Possible programme settings Cottons Extra Dry 9 kg Hard-wearing, heat-resistant fabrics that are made of more than one layer of cotton or linen and do not dry readily.
Programmes and buttons Timed programme warm All types of fabric; time programme. Suitable for pre-dried or slightly damp laundry and for drying off multi-layered, thick laundry. Notes ■ Only dry wool, sports shoes and soft toys with the basket for woollens ~ Page 14. ■ In the time programme, the laundry's residual moisture is not automatically detected. If the laundry is still too damp after the drying programme, repeat the programme and, if required, extend the programme length.
en Programmes and buttons Buttons Buttons Explanations and notes Note: Not all buttons and their functions can be selected in all programmes. Fine adjust – If the laundry is too damp after drying, you can finely adjust the dryness level e.g. Cupboard Dry. The dryness level can be increased with the degree of dryness in three stages, from – to •. If you have adjusted the dryness level, the setting for all programmes with a selectable dryness level is retained even after the dryer is switched off.
Operating the appliance 1 Operating the appliance Loading laundry and switching on the dryer Operatingheaplince en 2. Use the programme selector to set the required programme. The default programme settings for the selected programme appear in the display panel. Note: The dryer must be correctly positioned and connected, ~ Page 13. 1. Place the laundry in the drum. 2. Turn the programme selector to any programme to switch the dryer on. 3. Close the dryer door.
en Operating the appliance Programme sequence Cancelling the programme The programme status is indicated in the display field. The programme can be interrupted at any time; to pause, open the dryer door or press the Start button. e.g. 1:27 Expected programme duration in hours and minutes. Ù ö » Q - ˜“Ÿš Note: When a programme is selected, the expected drying time for the recommended load is displayed.
Operating the appliance Clean the fluff filter Note: During drying, fluff and hair from the laundry is trapped by the fluff filter. If the fluff filter is blocked or dirty, this reduces the flow of air, which prevents the dryer from achieving its maximum performance. Clean fluff filters also reduce energy consumption and the drying time. Clean the fluff filter after each drying cycle: 1. Open the dryer door and remove all fluff from the door. 2. Remove the fluff filter. en 6.
en Operating the appliance Emptying the condensate container Condensation will form in the appliance as it dries the laundry. If there is no drain hose connected to the appliance, the condensation water from the appliance will run into the condensation container. In this case, you will need to empty the condensation container each time the dryer finishes drying the laundry, and also if it becomes full before drying is complete. 1. Pull out the condensate container horizontally. 2.
Signal setting M Signal setting You can change the following settings: en 5. The volume of the audible signal at the end of the programme is shown in the display. Signalseting ■ ■ ■ The speed at which the washing machine was spun; only used if the anticipated drying time needs to be displayed more accurately, The volume of the audible signal at the end of the programme, The volume of the audible button signals. You will need to activate the setting mode in order to change these settings.
en Cleaning D Cleaning 3. Turn both locking levers towards each other. Cleaning the dryer and the control panel Cleanig : Warning Risk of death! There is a risk of electric shock as the dryer is operated with electricity. Disconnect the dryer from the mains before cleaning. Clean the dryer using only water and a soft, damp cloth. Remove all detergent residue, spray residue or other residues immediately. Do not use cleaning agents or agents for pre-treating laundry (e.g.
Cleaning en 9. First insert the heat exchanger, and then fit the heat exchanger's top cap in place. 10. Turn both locking levers back and close the maintenance flap until it locks into place. Cleaning the moisture sensor 11. Close the maintenance flap and press on it until you feel it click in place. Open the door and clean the moisture sensor with a coarse sponge. Note: The dryer is equipped with a stainless-steel moisture sensor. The moisture sensor measures how damp the laundry is.
Faults and what to do about them en 3 Faults and what to do about them uFaltsandwht odabut hem Faults ð in the display panel and drying has been interrupted. é in the display panel. Dryer does not start. Cause/remedy ■ ■ Empty the condensate container; ~ Page 28 and the dryer; ~ Page 14. If the optional condensation drain is installed, the drain hose may be blocked. Check the hose for deposits and flush the hose out.
Faults and what to do about them Faults Cause/remedy Drying time too long? ■ ■ ■ ■ The fluff filter may be dirty and cause a longer drying time. Clean the fluff filter. If the air inlet on the dryer is blocked or not freely accessible, this may increase the drying time. Make sure that the air inlet remains unobstructed. If the ambient temperature is higher than 35 °C, this may extend the drying time. Insufficient air circulation in the room may increase the drying time. Ventilate the room.
en After-sales service J After-sales service After-sales service If you cannot rectify the fault yourself (faults, what to do?), please contact our after-sales service. We will always find an appropriate solution to avoid unnecessary visits by engineers. The contact information for your nearest after-sales service can be found here or in the enclosed after-sales service directory. Please provide after-sales service with the dryer's product number (E-no.) and production number (FD).
Consumption values en [ Consumption values Consumption values table Consumptionvalues Programme Spin speed which is used for spinning the laundry Duration** Cottons Cupboard Dry* Iron Dry* 9 kg 4.5 kg 9 kg 4.5 kg 1400 rpm 129 min 69 min 4.36 kWh 2.31 kWh 1000 rpm 150 min 80 min 5.23 kWh 2.77 kWh 800 rpm 181 min 91 min 6.02 kWh 3.19 kWh 1400 rpm 106 min 54 min 2.61 kWh 1.38 kWh 1000 rpm 127 min 65 min 4.01 kWh 2.12 kWh 800 rpm 147 min 76 min 4.50 kWh 2.
en Technical data J Technical data Dimensions: 85 x 60 x 60 cm Height x width x depth Weight: Approx. 45 kg Maximum load: 9 kg Condensate container: 4.6 l Connected voltage: 220 - 240 V Connected load: Max. 2600 W Fuse: 13 A cTehnialdt Drum interior light* Ambient temperature: 5 - 35 °C Power consumption when switched off: 0.10 W Power consumption when ready for use (left-on mode): 0.
6
6
6
Repair order and advice in the event of faults GB IE 0344 892 8989 Calls charged at local or mobile rate. 01450 2655 0.03 € per minute at peak. Off peak 0.0088 € per minute.
