Dishwasher [en] User manual S185HCX01A
aus Table of contents Safety ............................................... 4 General information.......................... 4 Intended use..................................... 4 Restriction on user group................. 4 Safe installation ................................ 5 Safe use ........................................... 6 Damaged appliance ......................... 8 Risk to children ................................ 8 Safety systems ............................... 10 Preventing material damage ....
aus Home Connect .............................. 34 Home Connect quick start ............. 35 Home Connect settings.................. 35 Remote Start ............................... 35 Remote Diagnostics ...................... 36 Software update ............................. 36 Data protection............................... 36 Cleaning and servicing ................. 37 Cleaning the tub ............................. 37 Cleaning products .......................... 37 Tips on appliance care...................
aus Safety Safety Please read the safety information to ensure that you use the appliance safely. General information You can find general information about this instruction manual here. ¡ Read this instruction manual carefully. Only this will ensure you use the appliance safely and efficiently. ¡ Follow the safety instructions and warnings. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Check the appliance after unpacking it.
Safety aus Keep children under the age of 8 years away from the appliance and power cable. Safe installation Follow these safety instructions when installing the appliance. WARNING ‒ Risk of injury! Improper installation may cause injury. ▶ When installing and connecting the appliance, follow the instructions in the manual and installation instructions. WARNING ‒ Risk of electric shock! ¡ Improper installation is dangerous.
aus Safety WARNING ‒ Risk of fire! It is dangerous to use an extended power cord and non-approved adapters. ▶ Do not use extension cables or multiple socket strips. ▶ If the power cord is too short, contact Customer Service. ▶ Only use adapters approved by the manufacturer. WARNING ‒ Risk of injury! Hinges move when opening and closing the appliance door and can cause injury.
Safety aus ¡ Highly caustic alkaline or highly acidic cleaning agents in conjunction with aluminium parts in the interior of the appliance may cause explosions. ▶ Never use highly caustic alkaline or highly acidic cleaning agents, in particular commercial or industrial products, in conjunction with aluminium parts (e.g. grease filters of extractor hoods or aluminium pans), e.g. for the Machine Care programme. WARNING ‒ Risk of injury! ¡ Leaving the appliance door open may result in injury.
aus Safety ▶ Never kink, crush or modify the power cord. Damaged appliance Follow the safety instructions if the appliance is damaged. WARNING ‒ Risk of electric shock! ¡ If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never operate an appliance with a cracked or fractured surface. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.
Safety aus ¡ Children may breathe in or swallow small parts, causing them to suffocate. ▶ Keep small parts away from children. ▶ Do not let children play with small parts. WARNING ‒ Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk. ▶ With redundant appliances, unplug the power cord. Then cut through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close.
aus Safety Safety systems Protect children from possible hazards resulting from the appliance. The appliance is equipped with a "Childproof lock " → Page 12.
Preventing material damage Preventing material damage Preventing material damage Preventing material damage Safe installation Follow the instructions when installing the appliance. ATTENTION! ¡ Improper installation of the appliance may cause damage. ▶ If the dishwasher is installed above or below other domestic appliances, follow the information on installation in combination with a dishwasher in the installation instructions for the individual appliances.
aus Childproof lock Childproof lock Childproof lock The childproof lock lets you protect children from possible hazards resulting from the appliance. The appliance is equipped with an electrical childproof lock. Childproof lock Electric childproof lock The electric childproof lock makes it more difficult to open the appliance door. You can activate or deactivate the electric childproof lock in the "Basic settings" → Page 33.
Installation and connection aus marks on the appliance. These marks will disappear after the first wash cycle. The delivery consists of the following: ¡ Dishwasher ¡ Operating instructions ¡ Installation Instructions ¡ Warranty ¡ Installation material ¡ Steam guard plate ¡ Mains cable Installing and connecting the appliance You can position your built-under or integrable appliance in a fitted kitchen between wooden and plastic walls.
aus Installation and connection Electrical connection Connect your appliance to the power supply. Connecting the appliance to the electricity supply Notes ¡ Follow the "Safety instructions" → Page 5. ¡ Please note that the water safety system is only functional if there is a power supply. 1. Insert the non-heating appliance plug of the power cable into the appliance. 2. Insert the mains plug of the appliance into a nearby socket. The connection data for the appliance can be found on the rating plate. 3.
Familiarising yourself with your appliance aus Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Appliance You can find an overview of the parts of your appliance here. 7 6 8 5 9 4 10 3 11 2 12 1 1 1 Rating plate Rating plate with "E number and FD number" → Page 54. The data you need for "Customer Service" → Page 53.
aus Familiarising yourself with your appliance 2 Detergent dispenser 3 4 Bottom basket 5 Tablet collecting tray 6 7 8 9 Top basket 10 11 12 1 Lower spray arm Cutlery drawer 1 "Detergent" → Page 26 is added to the detergent dispenser. "Bottom basket" → Page 22 The lower spray arm washes the tableware in the bottom basket. If the tableware has not been washed properly, clean the spray arms.
Familiarising yourself with your appliance 1 2 3 4 5 12 7 10 9 8 1 ON/OFF button 2 3 4 5 6 Programme buttons "Switching on the appliance" → Page 31 "Switching off the appliance" → Page 32 "Terminating the programme" → Page 32 Programmes Rinse aid refill indicator "Rinse aid system" → Page 25 WLAN display "Home Connect" → Page 34 Water supply display Display for water supply Programme buttons and additional functions Start button Programmes "Additional functions" → Page 20 "Starting the pr
aus Programmes Programmes Programmes You can find an overview of the programmes that can be selected here. Different programmes, which can be found on the control panel of your appliance, are available depending on the appliance configuration. The running time may vary depending on the programme selected.
Programmes Programme Glass 40° 1 hr Programme Easy Clean Favourite Consumption values 1) Duration in hrs:mins 2) Energy consumption in kWh 3) Water consumption in litres ¡ 1) 1:33 - 1:38 ¡ 2) 0,800 - 0,850 ¡ 3) 12,0 - 14,0 ¡ 1) 1:00 ¡ 2) 1,300 ¡ 3) 10,5 ¡ ¡ ¡ ¡ ¡ ¡ 1) 2:10 2) 1,350 3) 15,2 1) 0:15 - 0:15 2) 0,050 - 0,050 3) 4,0 - 4,0 Information for test institute Test institutes can request the conditions for comparison tests, e.g.
aus Additional functions The pre-rinse program is saved to this button at the factory. Pre-rinse is suitable for all types of tableware. The tableware undergoes intermediate cleaning via cold rinsing. Tip: You can use the Home Connect app to download additional programmes and save them to the button.1 Save Favourite on the appliance. 1. Open the appliance door. 2. Press . 3. Press the right programme button. 4. Press the button for the relevant additional function. → "Additional functions", Page 20 5.
Features Additional func- Use tion ¡ There is a slight increase in energy consumption and the run time is extended. aus 3. Press in the levers on the right and left on the outside of the basket. Features Features You can find an overview of the possible features of your appliance and how to use them here. These features depend on the model of your appliance. Features Top basket Arrange cups and glasses in the top basket.
aus Features Bottom basket Cutlery basket Arrange pans and plates in the bottom basket. Arrange cutlery in the cutlery basket, always without sorting it and with the sharp points downwards. a Cutlery basket 1 Cutlery drawer Arrange cutlery in the cutlery drawer. Large plates up to a diameter of 31 cm can be arranged in the bottom basket as shown. Arrange cutlery with the points and sharp edges downwards.
Features Etagere Use the cutlery shelf and space underneath for small cups and glasses or for large items of cutlery, e.g. cooking spoons or serving cutlery. 1. Push the lever forwards down the prongs aus and fold . 1 2 2. To use the prongs again, fold them back up. a The prongs audibly click into position. If you do not need the cutlery shelf, you can fold it up. Baking sheet spray head Folding prongs Use the baking sheet spray head to clean large items of tableware, e.g.
aus Features Inserting baking sheet spray head Use the baking sheet spray head instead of the top basket to clean large trays, grilles and plates. 1. Remove top basket. 2. Insert the baking sheet spray head in the holder and turn to the right . Removing baking sheet spray head If you no longer require the baking sheet spray head, remove it from the appliance. 1. Turn the baking sheet spray head anticlockwise and remove from the holder. 2. Insert the top basket in the appliance.
Before using for the first time Before using for the first time Rinse aid system Before using for the first time Rinse aid system Configure the settings for initial startup. You can use the rinse aid system and rinse aid to get tableware and glasses rinsed perfectly without marks. Making settings for initial start-up Rinse aid Before using for the first time On initial start-up or after a reset to the factory settings, you will need to make settings. Tip: Connect your appliance to a mobile device.
aus Detergent Spilled rinse aid can cause excessive frothing during the wash cycle. 4. Close the lid of the dispenser for rinse aid. a The lid clicks into position. Setting the amount of rinse aid If there are streaks or water marks on tableware, change the amount of rinse aid. 1. Press . 2. To open the basic settings, press for 3 seconds. a The display shows . 3. Press repeatedly until the display shows the value set at the factory r05. 4.
Detergent Detergent Powder detergent Liquid detergent Description leave residues of detergent. This may impair the cleaning effect. Powder detergent is recommended for shorter "Programmes" → Page 18. The dosage can be adjusted to the level of soiling. Liquid detergent works faster and is recommended for shorter "Programmes" → Page 18 without PreRinse. Sometimes liquid detergent may leak out despite the detergent dispenser being closed.
aus ¡ ¡ ¡ ¡ ¡ ¡ Detergent levels of active agents or completely dispense with certain substances. The cleaning effect may be restricted here. Set the rinse aid system to the separate or combined detergent in use. Follow the manufacturer's instructions for each detergent. To prevent sticking, only touch detergents in a water-soluble pouch with dry hands and only ever place them in a dry detergent dispenser.
Tableware 3. Close the lid of the detergent dis- penser. aus Damage to glass and tableware Avoid damage to glass and tableware. a The lid clicks into position. a The detergent dispenser will open automatically at the optimum time during the programme. Powder or liquid detergent will spread around the washing tank and dissolve there. Tablets will fall into the tablet collecting tray and dissolve in the right dosage.
aus Tableware Cause The water temperature of the programme is too high. Recommendation Select a programme with lower temperatures. After the programme has ended, take glassware and cutlery out of the appliance without delay. Arrange tableware Arrange the tableware correctly to optimise the dishwashing result and prevent damage to both the appliance and tableware. Tips ¡ Using the appliance allows you to save energy and water compared to washing-up by hand.
Basic operation Removing tableware WARNING Risk of injury! Hot tableware can cause burns to the skin. When hot, tableware is sensitive to shock, may crack and can result in injury. ▶ When the programme has ended, do not empty the appliance until the tableware has cooled down for a while. 1. To prevent water dripping on the tableware, unload it starting at the bottom and working up. 2. Check the washing tank and accessories for soiling and clean if necessary.
aus Basic operation Starting the programme Terminate programme ▶ Press . a The programme has ended when the display shows "0h:00m". To end a programme early or to switch from a programme that has already started, you will need to cancel it first. 1. Open the appliance door. 2. Press for approx. 4 seconds. 3. Close the appliance door. a All displays light up. a As soon as the displays are off, the display shows "0h:01m" and the residual water is pumped out.
Basic settings aus Basic settings Basic settings You can configure the appliance to meet your needs. Basic settings Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Rinse aid dispensing Display text r05 1 Selection r00 - r06 Intensive drying d00 1 d00 - d01 Hot water A00 1 A00 - A01 InfoLight I01 1 I00 - I01 1 Description Set the amount of rinse aid to be dispensed.
aus Home Connect Basic setting Tone volume Display text b02 1 Selection b00 - b03 Childproof lock c00 1 c00 - c01 Wi-Fi Cn0 1 Cn0 - Cn1 Remote Start rc11 rc0 - rc2 Factory setting rE Start with YES Confirm with 1 Description Adjustment of tone volume. Level "b00" switches the signal tone off. Switch the → "Electric childproof lock", Page 12 on or off. Level "c00" switches the childproof lock off. Switch the wireless network connection on or off.
Home Connect Home Connect services in your country. You can find information about this at: www.home-connect.com. To be able to use Home Connect, you must first set up the connection to the WLAN home network (Wi-Fi1) and to the Home Connect app. ¡ → "Connecting the appliance to WLAN home network (Wi-Fi)", Page 35 The Home Connect app guides you through the entire login process. Follow the instructions in the Home Connect app to configure the settings.
aus Home Connect Activating Remote Start When you have selected "rc1" in the basic settings of this function, activate the function on your appliance. Requirements ¡ The appliance is connected to your WLAN home network. ¡ The appliance is connected to the Home Connect app. ¡ "rc1" is selected in the "Basic settings " → Page 34 of this function. ¡ A programme is selected. ▶ Press . If you open the appliance door, the function is automatically deactivated. a button lights up.
Cleaning and servicing Cleaning and servicing Cleaning and servicing To keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully. Cleaning and servicing aus Cleaning products Only use suitable cleaning products to clean your appliance. → "Safe use", Page 11 Tips on appliance care Cleaning the tub WARNING Risk of harm to health! Using detergents containing chlorine may result in harm to health. ▶ Never use detergents containing chlorine. 1.
aus Cleaning and servicing Run Easy Clean without tableware if the indicator for Easy Clean lights up on the control panel or if advised to do so by the display. The indicator will go out after you have run Easy Clean. If your appliance does not have a reminder function, we recommend performing Machine Care every 2 months. Running Easy Clean Run the Easy Clean programme if the indicator for Easy Clean lights up on the control panel or if advised to do so by the display.
Cleaning and servicing 2. Turn the coarse filter anticlockwise ‒ and remove the filter system . Check that no foreign objects fall into the sump. 2 1 aus Carefully clean the rim of dirt between the coarse and the fine filter. 6. Re-assemble the filter system. Make sure that the locking catches on the coarse filter click into position. 7. Insert the filter system into the appliance and turn the coarse filter clockwise. Make sure that the arrow markings match up.
aus Cleaning and servicing 3. Check the outlet nozzles on the spray arms for blockages under running water and remove any foreign bodies. 4. Insert the lower spray arm. a The spray arm clicks into position. 5. Insert the upper spray arm and screw it firmly in place.
Troubleshooting aus Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs. Troubleshooting WARNING Risk of electric shock! Improper repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ Only use genuine spare parts when repairing the appliance.
aus Troubleshooting Fault Appliance door does not open. Appliance door opens too wide when activated. Cause Appliance door and door seal are soiled. Troubleshooting ▶ Clean the appliance door and door seal with a damp cloth and a little washing-up liquid. Automatic door opening is not in home position. ▶ Wait one second after closing the Door is not correctly adjusted. ▶ Adjust the appliance door as de- appliance door. scribed in the installation instructions.
Troubleshooting Fault E:32-00 will light up alternately or indicator for water supply lights up. Cause aus Troubleshooting 5. Remove the filter from the supply hose 6. Clean the filter. 7. Re-insert the filter in the supply hose. 8. Screw the water connection back on. 9. Check the water connection for leaks. 10. Restore the power supply. 11. Switch the appliance on. E:92-40 will light up alternately. Filters are soiled or blocked. ▶ Clean the filters.
aus Troubleshooting Fault Cause A different error code apA technical fault is present. pears in the display window. E:01-00 to E:90-10 Troubleshooting 1. Press . 2. Unplug the appliance or switch off the fuse. 3. Wait at least 2 minutes. 4. Insert the mains plug of the appliance in a socket or switch on the fuse. 5. Switch the appliance on. 6. If the problem occurs again: ‒ Press . ‒ Turn off the water tap. ‒ Pull out the mains plug. ‒ Contact "Customer Service" → Page 53 and give the error code.
Troubleshooting Fault Tableware is not dry. Cause aus Troubleshooting 2. Use a different combined detergent with a better drying performance. Extra Dry not activated to im- ▶ Activate Extra Dry. prove drying performance. Tableware removed too 1. Wait until the programme ends. early or drying process not 2. Only remove tableware 30 minutes yet ended. after the programme has ended. Rinse aid used has a limited ▶ Use a name-brand rinse aid. drying performance. Eco products may have limited effectiveness.
aus Troubleshooting Fault Remnants of food on tableware. Cause Washing programme selected too weak. Troubleshooting ▶ Select a more intensive washing programme. ▶ Only remove large remnants of food Tableware has been precleaned too intensely. The and do not prerinse tableware. sensors chose a weaker programme. Stubborn soiling cannot be entirely removed. ▶ Do not position tall narrow receptTall narrow receptacles in corner areas are not rinsed acles at too great an angle or in adequately. corner areas.
Troubleshooting Fault Wipeable or water-soluble coatings are present inside the appliance or on the door. Cause Detergent substances are deposited there. These coatings cannot generally be removed with chemicals. Stubborn white coatings are Detergent substances are present on tableware, inside deposited there. These coatthe appliance or the door. ings cannot generally be removed with chemicals. Too little detergent is being used. Washing programme selected too weak.
aus Troubleshooting Fault Plastic parts are discoloured. Cause Washing temperature is too low. Troubleshooting ▶ Select a programme with a higher washing temperature. ▶ Only remove large remnants of food Tableware has been precleaned too intensely. The and do not prerinse tableware. sensors chose a weaker programme. Stubborn soiling cannot be entirely removed. ▶ Set the rinse aid system to a lower Amount of rinse aid to be dispensed is set too high. setting.
Troubleshooting Fault Rust spots on cutlery. Cause Cutlery may also rust if washed together with rusting items. Detergent residue is present Spray arms were blocked by in the detergent dispenser tableware so detergent was or the tablet collecting tray. not rinsed out. Detergent dispenser was damp when detergent was added. Excessive formation of foam Hand washing-up liquid is occurs. present in dispenser for rinse aid. Rinse aid has been spilled. aus Troubleshooting ▶ Do not wash rusting items.
aus Troubleshooting Malfunctions Fault Cause Water is left in the appliance Filter system or area under at the end of the prothe filters is blocked. gramme. Programme has not yet ended. Troubleshooting 1. Clean the "Filters" → Page 38. 2. Clean the "Wastewater pump" → Page 52. ▶ Wait until the programme ends or cancel the programme with Reset. ▶ → "Terminate programme", Page 32 Appliance cannot be switched on or operated. Software update is taking place.
Troubleshooting aus Mechanical damage Fault Appliance door cannot be closed. Lid on the detergent dispenser cannot be closed. Cause Door lock has been activated. Troubleshooting ▶ Close the appliance door with greater force. Door cannot be closed due to installation method. ▶ Check whether the appliance has Automatic door opening is not in home position. ▶ Wait for a second after opening the Detergent dispenser or lid are blocked by sticky detergent residue. ▶ Remove detergent residue.
aus Transportation, storage and disposal Clean wastewater pump 8. Insert the pump cover down Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned. WARNING Risk of injury! Sharp and pointed objects or fragments of glass may block the waste water pump and cause injury. ▶ Remove any foreign bodies carefully. 1. Disconnect the appliance from the power supply. 2.
Customer Service Protect appliance from frost Disposing of old appliance If there is a risk of frost where the appliance will be standing, e.g. in a holiday home, empty the appliance completely. ▶ "Empty the appliance." → Page 53 Valuable raw materials can be reused by recycling. Transporting the appliance To avoid damage to the appliance, empty it before transporting. Note: Always transport the dishwasher upright to prevent residual water getting into the machine's controls and damaging the appliance.
aus Technical specifications With any warranty claims, we will make sure that your appliance is repaired by trained after-sales technicians using genuine spare parts, including after the manufacturer's warranty has expired. Detailed information on the warranty period and terms of warranty in your country is available from our aftersales service, your retailer or on our website. If you contact Customer Service, you will require the product number (ENr.
Technical specifications aus Information regarding Free and Open Source Software This product includes software components that are licensed by the copyright holders as free software or open source software. The applicable licence information is stored on your home appliance. You can also access the applicable licence information via your Home Connect App: "Profile -> Legal information -> Licence Information".
*9001587889* Constructa-Neff Vertriebs-GmbH Carl-Wery-Straße 34 81739 München GERMANY 9001587889 en 010112 650 V5
