Instruction manual

aus Troubleshooting
48
Fault Cause Troubleshooting
Food remnants are left on
tableware in the top basket.
Tableware in the top basket
was placed too close to-
gether or top basket is over-
filled.
▶
Arrange tableware in the top basket
with sufficient space in between.
Position large items of tableware at
an angle, e.g. pans and ovenproof
dishes.
Remnants of food on table-
ware.
Tableware is placed too
close together or basket is
overfilled.
1. Arrange tableware with sufficient
space in between.
The spray jets must reach the sur-
faces of the tableware.
2. Avoid points of contact.
Spray arm rotation is
blocked.
▶
Arrange tableware so that it does
not obstruct spray arm rotation.
Spray arm nozzles are
blocked.
▶
Clean the "Spray arms" →Page42.
Filters are soiled.
▶
Clean the filters.
→"Cleaning filters", Page41
Filters are inserted incor-
rectly and/or not engaged.
1. Insert the filters properly.
→"Filter system", Page41
2. Engage the filters.
Washing programme selec-
ted too weak.
▶
Select a more intensive washing
programme.
▶
Adjust the sensitivity of the sensors.
→"Sensors", Page13
Tableware has been pre-
cleaned too intensely. The
sensors chose a weaker pro-
gramme. Stubborn soiling
cannot be entirely removed.
▶
Only remove large remnants of food
and do not prerinse tableware.
▶
Adjust the sensitivity of the sensors.
→"Sensors", Page13
Tall narrow receptacles in
corner areas are not rinsed
adequately.
▶
Do not position tall narrow recept-
acles at too great an angle or in
corner areas.
Top baskets on right and left
are not set to same height.
▶
Set the top baskets on the left and
right to the same level.
→"Top basket", Page24