User Manual

en Accessories
8
Tip:You can remove the metal residue that remains
when some items of cookware are moved on the pan
support by cleaning it properly.
→"Cleaning the pan supports", Page11
4.4 Residual heat indicator
The hob has a two-stage residual heat indicator for
each burner. Do not touch the burner or the parts close
to the burner while the residual heat indicator is lit.
Display Meaning
⁠ The burner and the parts close to the
burner are very hot.
⁠ The burner and the parts close to the
burner are hot.
5 Accessories
You can buy accessories from the after-sales service,
from specialist retailers or online. Only use original ac-
cessories, as these have been specifically designed for
your appliance.
Accessories vary from one appliance to another. When
purchasing accessories, always quote the exact
product number (E no.) of your appliance. →Page12
You can find out which accessories are available for
your appliance in our catalogue, in the online shop or
from our after-sales service.
www.neff-international.com
Accessories Description Use
Additional wok grid ¡ Only use on the multi-crown burner.
¡ Always use for cookware with a rounded
base.
¡ Recommended in order to extend the ser-
vice life of the appliance.
Additional espresso maker
grid
¡ Only use on the burner with the lowest
power setting.
¡ Use with cookware with a diameter smal-
ler than 12.
Simmer plate ¡ For cooking on a low heat.
¡ Use the economy burner or the standard-
output burner. If there are several stand-
ard-output burners, it is preferable to use
the rear or front-right burner.
¡ Place it on the pan support with the
bumps facing up – never place it directly
on the burner.
6 Basic operation
6.1 Igniting a gas burner
The hob has automatic ignition of the burners.
WARNING‒Risk of fire!
Escaping gas may ignite.
▶ If the burner does not ignite after 10seconds, turn
the control knob to the "Off" position and open the
door or window in the room. do not attempt to re-ig-
nite the burner for at least one minute.
▶ In the event of the burner flames being accidentally
extinguished, turn off the burner control and do not
attempt to re-ignite the burner for at least one
minute.
ATTENTION!
If you turn the control knob directly between position
and1, malfunctions may occur.
▶ For this reason, never turn directly from position
to position 1 or vice versa.
1.
Press the control knob for the selected burner and
turn it anti-clockwise to the highest level.
Keep the control knob pressed in.
a For all of the burners, sparks are generated and the
flame ignites. ⁠appears in the display.
2.
Wait a few seconds and release the control knob.
→"Safety system", Page9
3.
Turn the control knob to the required position.