Product specification sheet

2/3
N 70, gas hob, 75 cm, T
e
mpered gla
s
s
T27CS
5
9S0
Features
Design
●
tempered glass surface, black
●
Two built-in options:
- Flush installation - Surface mounted installation: install the hob
either flush or slightly raised on the worktop
●
Cast iron pan supports with rubber feet
Usage convenience
●
FlameSelect with 9 steps: precisely control and adjust the flame in
nine defined levels.
●
Design co-ordinated control dials: easily access dials in front with
strong grip for effortless turning.
●
Ignition via control dials: just push and turn the dials to ignite the
flame.
Burners and power
●
5 burner hob
●
Left front: Economy burner up to 1 KW (depending on gas type)
●
Left rear: Standard burner up to 1.75 KW (depending on gas type)
●
Center front: Wok burner up to 4 KW (depending on gas type)
●
Right rear: High speed burner up to 3 KW (depending on gas type)
●
Right front: Standard burner up to 1.75 KW (depending on gas
type)
Safety
●
Flame failure safety device: prevents unwanted gas flow when
flame goes out.
Installation (gas types & measurements)
●
Usable for: Nat gas L/LL G25/20mbar(DE)
NG H/E 20mbar, E+ 20/25mbar Natural gas H 25 mbar (HU)
Natural gas L 25 mbar (NL) Liquid gas G30,31 28-30/37mbar
Liquid gas G30 37 mbar (PL) Liquid gas 50 mbar
●
Factory set for connection to mains gas
●
Nozzle set for LPG jets (28-30/37mbar) included. Nozzles for
all other gas types can be ordered via the customer service. For
nozzle change, please contact the customer service.
●
Dimensions of the product (HxWxD mm): 58 x 752 x 520
●
Required niche size for installation (HxWxD mm) : 45 x 560 x (480
- 492)
●
Min. worktop thickness: 30 mm
●
Power cord: 1 m
●
Connected load: 11.5 KW