Product specification sheet

3/7
N 50, I
n
duction hob w
i
th in
t
eg
r
a
t
ed
v
entilation
syste
m, 60 cm
T
4
6CB4AX2
Features
enhanced aesthetical integration. Grease filtration efficiency of 94
%.
●
- All parts of the unit are easy-to-clean, fully dishwasher safe and
heat resistant.
●
- (Upper) Liquid collector unit with 200ml of capacity for standard
accidental spillages or cooking condensate.
●
- Powerful drainage system for spillages that exceed 200ml of
liquids.
●
- Liquid safety collector with additional capacity of 700ml for more
severe accidental situations. Dishwasher safe. Easily accessible
and detachable from below.
●
- Overall capturing capacity of 900ml (200ml + 700ml).
●
- Watertight motor system.
●
Ventilation system performance:
●
- Extraction performance in ducted extraction (according to EN
61591): min. normal setting 330 m3/h , max. normal setting 500
m3/h , max. Boost-/Intensive setting 622 m3/h .
●
- Extraction performance in recirculated extraction (according to
EN 61591): min. normal setting 276 m3/h , max. normal setting
460 m3/h , max. Boost-/Intensive setting 600 m3/h.
●
- Noise level in ducted extraction (Sound power level according
to EN 60704-3): min. normal setting 61 dB re 1 pW, max. normal
setting 69 dB re 1 pW, max. Boost-/Intensive setting 74 dB re 1
pW.
●
- Noise level in recirculated extraction (Sound power level
according to EN 60704-3. ): min. normal setting 56 dB re 1 pW,
max. normal setting 68 dB re 1 pW, max. Boost-/Intensive setting
72 dB re 1 pW.
●
- Grease filter efficiency (according to EN 61591) 94 %.
●
Consumption data and energy efficiency (according to Regulation
(EU) No 65/2014):
●
- Energy Efficiency Class: B (at a range of energy efficiency classes
from A+++ to D).
●
- Fluid Dynamic Efficiency: A .
●
- Average energy consumption: 57 .
●
- Grease filtration effciency class: B .
●
- Noise min. normal setting & max. normal setting: 61 dB & 69
dB .
●
For recirculation configuration: 2 x 2 battery of directly integrated,
high-performance cleanAir odor filters.
●
- Optimised odour reduction performance for cooking applications
with complex odour molecules (e.g. fish).
●
- Large scale filter surface with high odour reduction capabilities.
●
- Lifetime of 360 hours of cooking (non-regenerative).
●
- Low-noise filters with optimised psycho-acoustics.
●
- Easy-to-access and easy-to-remove from above.
●
- Replenishment cleanAir filter set Z821VR0.
●
For ducted extraction configuration: 2 x 2 sets of directly
integrated, high-performance low-noise acoustic filters for
significantly lower noise and improved psycho-acoustics.
Planning & installation notes
●
Suitable for ducted or recirculated extraction configuration in 4
different options (unducted, partly and fully ducted recirculation
or ducted extraction). Installation accessories for unducted
recirculation, among these four cleanAir odor filters and a
telescopic slider element, are included in the cooktop. The
 included accessories allow easy and quick installations and
can be planned in all worktop depths ≥60cm.For other types of
installation, one of the following accessory kits is recommended:
●
Z861KR1 for partly-ducted recirculation in worktops of ≥60cm
depth with max. worktop height of 960 mm. Z861KR0 for partly-
ducted recirculation in worktops of 70cm depth of ≥70cm depth
with max. worktop height of 960 mm.
●
Z861KE1 as starter kit for ducted extraction in worktops of ≥60cm
depth.
●
To complete the fully ducted extraction or to do any other
individual recirculation planning different ducting accessories are
available.
●
Planning suggestions:
●
- Installation is possible in island as well as wall oriented
configurations.
●
The product and its accesories comply with the Needle Flame
Test (according to IEC 60695-11-5) and the V2 flammability class
(according to UL94).
●
- The max. immersion depth is 223 mm below worktop surface.
●
- The appliance must be freely accessible from below (i.e. for
accessing the lower liquid safety collector).
●
- No false floor is necessary below the cooktop with integrated
downdraft ventilation system. The drawers and/or shelves in the
floor unit must be removable. The backpanel of the floor unit can
be kept - only a cut-out for the air outlet is needed (position and
size can be taken from the installation instructions).
●
An installation with unducted recirculation requires a vertical
aperture of min. 25mm behind the backpanel of the furniture.
Suggested for ideal performance are 50mm.
●
- The minimum worktop thickness is 16mm for top mounted and
flush installed appliances with the standard installation system.
Installation in even thinner worktops is also possible with the
spare part: content 626792.
●
- The overall appliance weight is 26kg - the bearing capacity and
stability, in the case of very thin worktops in particular, must be
supported using suitable substructures. The overall appliance
weight and the worktop manufacturer's structural integrity
specifications are to be taken into account.
●
- For partly ducted and unducted recirculation extraction
installations, a return-flow aperture of ≥400cm² is to be respected
in the plinth area. The aperture can be realized via outlet grids,