HOB [en] INSTRUCTION MANUAL T4..D5...
: : [ : : : : : ,(& 2 Ø = cm
en Table of contents [ en] I NSTRUCTI ON MANUAL 8 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ( Important safety information . . . . . . . . . . . . . . . 5 ] Causes of damage . . . . . . . . . . . . . . . . . . . . . . . . 6 k Wipe protection . . . . . . . . . . . . . . . . . . . . . . . . . 17 b Automatic safety cut-out . . . . . . . . . . . . . . . . . . 17 Q Basic settings. . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Overview . . . . . . . . . . . . . . . . .
en Intended use 8Intended use Read these instructions carefully. Please keep the instruction and installation manual, as well as the appliance certificate, in a safe place for later use or for subsequent owners. Check the appliance after removing it from the packaging. If it has suffered any damage in transport, do not connect the appliance, contact the Technical Assistance Service and provide written notification of the damage caused, otherwise you will lose your right to any type of compensation.
Important safety information (Important safety information I mpor t ant saf et y i nf or mat i on :Warning – Risk of fire! Hot oil and fat can ignite very quickly. Never leave hot fat or oil unattended. Never use water to put out burning oil or fat. Switch off the hotplate. Extinguish flames carefully using a lid, fire blanket or something similar. Risk of fire! ■ The hotplates become very hot. Never place combustible items on the hob. Never place objects on the hob.
en Causes of damage ]Causes of damage Caution! Rough pan bases may scratch the hob. ■ Avoid leaving empty pots and pans on the hotplate. Doing so may cause damage. ■ Do not place hot pans on the control panel, the indicator area, or the hob frame. Doing so may cause damage. ■ Hard or pointed objects dropped on the hob may damage it. ■ Aluminium foil and plastic containers will melt if placed on the hotplate while it is hot. The use of laminated sheeting is not recommended on the hob.
Environmental protection 7Environmental protection In this section, you can find information about saving energy and disposing of the appliance. Envi r onment al pr ot ect i on Energy-saving advice ■ ■ ■ ■ ■ ■ Always use the correct lid for each pan. Cooking without a lid uses a lot more energy. Use a glass lid to provide visibility and avoid having to lift the lid. Use pans with flat bases. Bases that are not flat use a lot more energy.
en ■ Induction cooking The ferromagnetic area will also be reduced if the material from which the base of the cookware is made contains aluminium, for example. This may mean that the cookware will not become sufficiently hot or even that it will not be detected.
Getting to know your appliance en *Getting to know your appliance You can find information on the dimensions and power of the hotplates in~ Page 2 Get i ng t o know your ap l i ance Note: . Depending on the appliance model, individual details and colours may differ.
en Operating the appliance Residual heat indicator The hob has a residual heat indicator for each hotplate. This indicates that a hotplate is still hot. Do not touch a hotplate while the residual heat indicator is lit up. The following indicators are shown depending on the amount of residual heat: ■ ■ Display •: High temperature Display œ: Low temperature If you remove the cookware from the hotplate during cooking, the residual heat indicator and the selected heat setting will flash alternately.
Operating the appliance Changing the heat setting Chef's recommendations Select the hotplate and touch the @ or A symbol until the required heat setting appears. Recommendations Switching off the hotplate Select the hotplate and then touch the @ or A symbol until ‹ appears. ■ ■ ■ The hotplate switches itself off and the residual heat indicator appears. Notes ■ If no pan has been placed on the hotplate, the selected power level flashes. After a certain time has elapsed, the hotplate switches off.
en Operating the appliance Heat setting Cooking time (mins) Boiling, steaming, braising Rice (with double the volume of water) Rice pudding*** Unpeeled boiled potatoes Boiled potatoes Pasta, noodles* Stew Soups Vegetables Vegetables, frozen Cooking in a pressure cooker 2. - 3. 2-3 4. - 5. 4. - 5. 6-7 3. - 4. 3. - 4. 2. - 3. 3. - 4. 4. - 5.
CombiZone function en wCombiZone function uMove function Using this function, the two left hotplates, which are the same size, can be linked together. When doing this, the same heat setting is set for both hotplates. This is especially suitable for cooking with elongated cookware. You can use this function to link the two left hotplates, which are the same size, and select a different heat setting for each hotplate.
en Time-setting options Activation 1. Select one of the two hotplates assigned to the Move function. ý symbol. The ó indicator lights up. The heat settings light up on the displays for each of the two hotplates. The function has now been activated. 2. Touch the OTime-setting options Ti me- set i ng opt i ons Your hob has two timer functions: ■ ■ Programming the cooking time Kitchen timer Notes The display for the hotplate with the cookware lights up more brightly.
PowerBoost function Changing or deleting the time Select a hotplate. Touch the 0 symbol and use the @ or A symbols to change the cooking time, or set the time to ‹‹. When the time has elapsed The hotplate switches off. An audible signal sounds. ‹‹ lights up in the timer display for 60 seconds. Touch the 0 symbol. The displays go out and the audible signal ceases. Notes ■ If a cooking time was programmed for several hotplates, the time information for the selected hotplate is shown in the timer display.
en Keep warm function zKeep warm function This function is suitable for melting chocolate or butter and for keeping food warm. AChildproof lock You can use the childproof lock to prevent children from switching on the hob. Ke p war m f unct i on Chi l dpr o f l ock Activation Activating and deactivating the childproof lock 1. Select the required hotplate. 2. Touch the – within the next 10 seconds. – lights up on the display. The function is activated. Deactivation 1. Select the hotplate. 2.
Wipe protection en kWipe protection bAutomatic safety cut-out If you wipe over the control panel while the hob is switched on, settings may be altered. To avoid doing this, you can use the hob's "Lock control panel for cleaning" function. If a hotplate operates for an extended period and no settings are changed, the automatic safety shut-off is activated. Wipe pr ot ect i on To activate: Touch the z symbol. You will hear an audible signal. The control panel is locked for 35 seconds.
en Basic settings QBasic settings The appliance has various basic settings. These basic settings can be altered to suit your individual requirements. Basi c set i ngs Indicator/ symbol Function ™‚ Childproof lock ‹ ‚ ƒ ™ƒ Signal tones ‹ ‚ ƒ „ ™„ Confirmation and fault signals are switched off. Only the fault signal is switched on. Only the confirmation signal is switched on. All signal tones are switched on.* Display energy consumption ‹ ‚ ™† Manual*. Automatic. Function deactivated.
Basic settings ™‹ en Restore to standard settings ‹ ‚ Individual settings.* Restore factory settings. *Factory setting **The hob's maximum power output is shown on the rating plate. -------- To access the basic settings: 6. Touch the The hob must be off. The settings have been saved. 1. Switch on the hob. 2. Within ten seconds, touch and hold the z symbol for approximately four seconds. The first four displays provide product information. Touch the @ or A symbol to view the individual displays.
en Energy consumption indicator [Energy consumption indicator This function indicates the total amount of energy consumed by this hob the last time it was used for cooking. Once the hob is switched off, the energy consumption is displayed in kilowatt hours (e.g. ‚.‹‰ kWh) for 10 seconds. The accuracy of the information displayed depends on the voltage quality of the mains power supply, among other factors.
Power manager en hPower manager DCleaning You can use the power manager to set the total power of the hob. The hob is preset at the factory. Its maximum performance is specified on the rating plate. You can use the power manager to change the value in accordance with the requirements for the relevant electrical installation. In order not to exceed this set value, the hob automatically distributes the power available between the cooking zones that are switched on.
en Frequently Asked Questions (FAQ) {Frequently Asked Questions (FAQ) Fr equent l y Asked Quest i ons ( FAQ) Using the appliance Why can't I switch on the hob and why is the childproof lock symbol lit? The childproof lock is activated. You can find information on this function in the section on ~ "Childproof lock" Why are the displays flashing and why can I hear an audible signal? Remove any liquid or food remains from the control panel. Remove any objects from the control panel.
Trouble shooting en Cleaning How do I clean the hob? Using a special glass-ceramic cleaning agent produces the best results. We advise against using harsh or abrasive cleaning agents, dishwater detergent (concentrated) or scouring pads. You can find more information on cleaning and caring for your hob in the section on ~ "Cleaning" 3Trouble shooting Usually, faults are small matters that are easy to eliminate. Please read the information in the table before calling the after-sales service.
en Customer service 4Customer service Our after-sales service is there for you if your appliance needs to be repaired. We will always find an appropriate solution, also in order to avoid after-sales personnel having to make unnecessary visits. Cust omer ser vi ce E number and FD number Please quote the E number (product number) and the FD number (production number) of your appliance when contacting the after-sales service.
Test dishes en ETest dishes This table has been produced for test institutes to facilitate the testing of our appliances. The data in the table refer to our Schulte-Ufer cookware accessories (4-piece cooking set for induction hob Z9442X0) with the following dimensions: Test di shes ■ ■ ■ ■ Saucepan: 16 cm Ø, 1.2 l for 14.5 cm Ø hotplates Pot: 16 cm Ø, 1.7 l for 14.5 cm Ø hotplates Pot: 22 cm Ø, 4.
en Test dishes Test dishes Preheating Heat set- Cooking time Cookware Lid ting (min:sec) Cooking rice pudding Rice pudding, cooked with the lid on Temperature of the milk: 7 ºC Heat the milk until it starts to rise up. Set the recommended heat setting and add rice, sugar and salt to the milk. The cooking time, including preheating, is approx. 45 minutes. Ingredients: 190 g short-grain rice, 90 g sugar, 750 ml milk (3.
Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd.
