User Manual

PowerBoost function en
17
vPowerBoost function
Po we r Bo o s t f unct i on The PowerBoost function enables you to heat up large
quantities of water faster than when using heat setting
Š.
This function can always be activated for a hotplate,
provided the other hotplate in the same group is not in
use (see illustration). Otherwise,
˜ and Š will flash in
the display for the selected hotplate; the
Š heat setting
will then be set automatically without activating the
function.
Note: In the combi zone, the PowerBoost function can
only be activated if the two hotplates are used
independently of each other.
Activating
1. Select a hotplate.
2. Touch the ˜ symbol. The ˜ and õ indicators light
up.
The function is activated.
Deactivating
1. Select a hotplate.
2. Touch the ˜ symbol. The ˜ and õ indicators go
out. The heat setting Š lights up in the hotplate's
display.
The function is deactivated.
Note: In certain circumstances, the PowerBoost
function can switch itself off automatically in order to
protect the electronic elements inside the hob.
xShortBoost function
Sh o r t Bo os t f unct i on The ShortBoost function enables you to heat cookware
faster than when using heat setting Š.
After deactivating the function, select the appropriate
heat setting for your food.
This function can always be activated for a hotplate,
provided the other hotplate in the same group is not in
use (see illustration). Otherwise, ˜ and Š will flash in
the display for the selected hotplate; the Š heat setting
will then be set automatically without activating the
function.
Note: For the combined cooking zone, the ShortBoost
function can only be activated if it is used as two
independent hotplates.
Recommendations for use
■ Always use cookware that has not been pre-heated.
■ Use pots and pans with a flat base. Do not use
cookware with a thin base.
■ Never leave empty cookware, oil, butter or lard to
heat up unattended.
■ Do not place a lid on the cookware.
■ Place the cookware on the centre of the hotplate.
Ensure that the diameter of the base of the
cookware corresponds to the size of the hotplate.
■ You can find information on the type, size and
positioning of the cookware in section ~ "Induction
cooking"
Activating
1. Select a hotplate.
2. Touch the ˜ symbol twice. The ˜ and w indicators
light up.
The function is activated.
Deactivating
1. Select a hotplate.
2. Touch the ˜ symbol. The ˜ and w displays go out.
The heat setting Š lights up in the display for the
hotplate.
The function is deactivated.
Note: After 30 seconds, this function will automatically
switch off.



