User Manual

Getting to know your appliance en
11
The control panel
Touch controls
Touching a symbol activates the associated function.
Notes
■ Always keep the control panel clean and dry.
Moisture reduces its effectiveness.
■ Do not place any cookware near the indicators or
sensors. The electronics could overheat.
Residual heat indicator
The hob has a residual heat indicator for each hotplate.
This indicates that a hotplate is still hot. Do not touch a
hotplate while the residual heat indicator is lit up.
The following indicators are shown depending on the
amount of residual heat:
■ Display •: High temperature
■ Display œ: Low temperature
If you remove the cookware from the hotplate during
cooking, the residual heat indicator and the selected
heat setting will flash alternately.
When the hotplate is switched off, the residual heat
indicator will light up. Even after the hob has been
switched off, the residual heat indicator will stay lit for as
long as the hotplate is still warm.
Touch controls
#
Switch the appliance on and off
z
Lock the control panel for cleaning
1
Activate the childproof lock
$
Select a hotplate
A
Switch between the setting areas for the hob and the
ventilation system/reset the saturation indicators
A@
Set the heat settings/set the ventilation system/ set
the temperature settings
þ
Activate the Combi zone function
Û
Switch on the frying sensor
˜
Switch on the PowerBoost function/switch on inten-
sive mode for the ventilation system
–
Switch on the keep-warm function
0
Program the cooking time and kitchen timer
Indicators/symbols
Ú
Operating status
‚-Š
Heat settings/fan settings
•/œ
Residual heat
‹‹
Timer function
‚
Childproof lock
z
The control panel is locked for cleaning purposes
˜
PowerBoost function/intensive mode for ventilation
–
Keep-warm function
ó
Combi zone function
Û
Frying sensor
x
Setting the cooking time
˜, ™,
š, ›
Temperature settings
S
Kitchen timer
ö
Time display