User Manual

en Operating the appliance
14
Switching the ventilation system on and off
Note: Always adjust the setting according to the current
conditions. To eliminate strong cooking smells, select a
high fan setting.
Note: If no metal grease filter is available, the ventilation
system cannot be switched on. Insert the metal grease
filter. The hob functions are also available if there is no
metal grease filter.~ "Cleaning" on page 26
Note: Do not obstruct the ventilation openings. Do not
place objects on the filter cover, as this will reduce the
power of the ventilation system.
Note: Using tall items of cookware may prevent the
extraction system from working at optimum power. The
extraction power can be improved by placing a lid on
the cookware at an angle.
Switching on the ventilation system
If the ventilation system cannot be switched on, make
sure that the metal grease filter is correctly inserted.
1. Touch the A symbol.
The ventilation system will start at fan setting ƒ. The
fan setting that is selected will be displayed.
Notes
– Heat settings cannot be changed while the
setting is being applied for the ventilation system.
– During a period of a few seconds, a fan setting
for the ventilation system can be selected. The @
and A symbols can then be used to configure the
heat settings again.
2. Use the @ and A symbols to select the setting you
require.
The setting that is selected will be displayed.
3. To set a different setting, touch the A symbol and
select the required setting using the @ and A
symbols.
The setting that is selected will be displayed.
Switching off the ventilation system
If you want to switch off the appliance, touch the
# symbol. If you only want to switch off the ventilation
system, proceed as follows:
1. Touch the A symbol.
2. Use the A symbol to select fan setting ‹.
This sets the fan setting for the ventilation system
to ‹.
3. Touch the A symbol to switch to the setting area for
the hob.
Note: The run-on will start once the appliance has been
switched off (depending on the basic settings selected).
Intensive setting
Activate intensive mode if strong odours or large
amounts of steam are produced. In this mode, the
ventilation system briefly operates at maximum power. It
automatically switches back to a low setting after a
short time.
Switching on
1. Touch the A symbol.
ƒ is shown in the display panel. The line below the
power setting ƒ lights up.
2. Touch the ˜ symbol.
˜ will be shown on the display panel. The line below the
˜ symbol will be lit.Intensive mode is now activated.
Note: After eight minutes, the appliance automatically
switches back to fan setting Š.
Switching off
1. Touch the A symbol.
2. Use the A symbol to select fan setting ‹.
This sets the fan setting for the ventilation system
to ‹.
3. Touch the A symbol to switch to the setting area for
the hob.
Automatic start
Depending on the basic settings selected, the following
options will be available once you have selected the fan
setting for a cooking zone:
■ The ventilation system will not start.
■ The ventilation system will start at a specified fan
setting.
Select the option you want to use in the basic settings.
~ "Basic settings" on page 23

