User Manual

en Before using for the first time
14
6. Use the twist knob to select the ‚ setting.
7. Touch the . symbol for at least four seconds.
This saves the settings.
8. Use the main switch in order to exit the basic
settings.
The display of the electronic controller is switched to air
extraction mode.
Switching over the display for circulating-air mode
When it is delivered, the appliance is set to air
recirculation mode.
If the settings have been changed, proceed as follows
to set the display for the electronic controller in the
basic settings for air recirculation mode.
1. Check whether the appliance is connected and
switched off.
2. Switch on the appliance.
3. Within the next 10 seconds, press and hold the
. symbol for approximately 4 seconds.
The first four displays provide product information.
Turn the twist knob to view the individual displays.
4. Touch the . symbol again to access the basic
settings.
™‚ and ‹ light up as a presetting in the displays.
5. Touch the . symbol repeatedly until ™‚ˆ is
displayed.
6. Use the twist knob to select the ‹ setting.
7. Touch the . symbol for at least four seconds.
This saves the settings.
8. Use the main switch in order to exit the basic
settings.
The display of the electronic controller is switched to air
recirculation mode.
Product information Display screen
After-sales service index (ASSI)
‹‚
Production number
”š
Production number 1
Š†.
Production number 2
‹.†