User Manual

en Basic settings
32
To access the basic settings:
The hob must be off.
1. Switch on the hob.
2. Within ten seconds, touch and hold the . symbol for
approximately three seconds.
The first four displays provide product information.
Turn the twist knob to view the individual displays.
3. Within ten seconds, touch and hold the . symbol for
approximately four seconds.
The first four displays provide product information.
Turn the twist knob to view the individual displays.
4. Touch the . symbol again to access the basic
settings.
™‚ and ‹ light up as a presetting in the displays.
5. Touch the . symbol repeatedly until the required
function is displayed.
6. Then use the twist knob to select the required
setting.
7. Touch the . symbol for at least four seconds.
The settings have been saved.
Leaving the basic settings
Turn off the hob with the main switch.
™‚ˆ
Set air recirculation mode or air extraction mode
‹ Air recirculation mode has been set.*
‚ Air extraction mode has been set.
™‚‰
Set automatic start
‹ Switched off.
‚ Switched on: Automatic mode with sensor control*
ƒ Switched on: The ventilation starts at a fixed fan setting.
™‚Š
Set the sensor sensitivity for the ventilation system
‚ Lowest sensor sensitivity setting.
ƒ Medium sensor sensitivity setting.*
„ Highest sensor sensitivity setting.
™ƒ‹
Set the run-on
‹ Switched off.
‚ Switched on: Automatic function with sensor-controlled run-on.*
ƒ Switched on: The ventilation system runs in air extraction mode for approx. six minutes and in circulating air mode for approx.
30 minutes at fan setting ‚ and automatically switches off once this time has elapsed.
™‹
Restore the factory settings
‹ Individual settings.*
‚ Restore to factory settings.
Display Function
* Factory settings
Product information Display screen
After-sales service index (ASSI)
‹‚
Production number
”š
Production number 1
Š†.
Production number 2
‹.†