HOB [en] INSTRUCTION MANUAL T59.S5...
: : : : : : : : : : ,(& 2 Ø = cm
en Table of contents [ en] I NSTRUCTI ON MANUAL 8 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 ( Important safety information . . . . . . . . . . . . . . . 6 ] Causes of damage . . . . . . . . . . . . . . . . . . . . . . . . 7 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 7 Environmental protection . . . . . . . . . . . . . . . . . . 8 Energy-saving advice . . . . . . . . . . . . . . . . . . . . . . . . . .
en { Frequently Asked Questions (FAQ) . . . . . . . . . 40 3 Trouble shooting . . . . . . . . . . . . . . . . . . . . . . . . 42 4 Customer service . . . . . . . . . . . . . . . . . . . . . . . . 43 E number and FD number . . . . . . . . . . . . . . . . . . . . . 43 E Test dishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Produktinfo Additional information on products, accessories, replacement parts and services can be found at www.neff-international.com and in the online shop www.
Intended use 8Intended use Read these instructions carefully. Please keep the instruction and installation manual, as well as the appliance certificate, in a safe place for later use or for subsequent owners. Check the appliance after removing it from the packaging. If it has suffered any damage in transport, do not connect the appliance, contact the Technical Assistance Service and provide written notification of the damage caused, otherwise you will lose your right to any type of compensation.
en Important safety information (Important safety information I mpor t ant saf et y i nf or mat i on :Warning – Risk of fire! Hot oil and fat can ignite very quickly. Never leave hot fat or oil unattended. Never use water to put out burning oil or fat. Switch off the hotplate. Extinguish flames carefully using a lid, fire blanket or something similar. Risk of fire! ■ The hotplates become very hot. Never place combustible items on the hob. Never place objects on the hob.
Causes of damage en ]Causes of damage Caution! Rough pan bases may scratch the hob. ■ Avoid leaving empty pots and pans on the hotplate. Doing so may cause damage. ■ Do not place hot pans on the control panel, the indicator area, or the hob frame. Doing so may cause damage. ■ Hard or pointed objects dropped on the hob may damage it. ■ Aluminium foil and plastic containers will melt if placed on the hotplate while it is hot. The use of laminated sheeting is not recommended on the hob.
en Environmental protection 7Environmental protection In this section, you can find information about saving energy and disposing of the appliance. Envi r onment al pr ot ect i on Energy-saving advice ■ ■ ■ ■ ■ ■ Always use the correct lid for each pan. Cooking without a lid uses a lot more energy. Use a glass lid to provide visibility and avoid having to lift the lid. Use pans with flat bases. Bases that are not flat use a lot more energy.
Induction cooking Some induction cookware does not have a fully ferromagnetic base: ■ ■ If the base of the cookware is only partially ferromagnetic, only the area that is ferromagnetic will heat up. This may mean that heat will not be distributed evenly. The non-ferromagnetic area may not heat up to a sufficient temperature for cooking. The ferromagnetic area will also be reduced if the material from which the base of the cookware is made contains aluminium, for example.
en Getting to know your appliance *Getting to know your appliance You can find information on the dimensions and power of the hotplates in~ Page 2 Get i ng t o know your ap l i ance Note: . Depending on the appliance model, individual details and colours may differ. The control panel Touch controls Main switch # – ˜ Û { | œ x .
Getting to know your appliance en The hotplates Hotplates Simple hotplate Û/ Use cookware that is a suitable size $ ò Triple-circuit hotplate The hotplate switches on automatically when you use cookware with a base that covers the outer edge of the zone (ð or ò). á Flexible cooking zone See section on ~ "Flex Zone" Only use cookware that is suitable for induction cooking; see the section on ~ "Induction cooking". Residual heat indicator The hob has a residual heat indicator for each hotplate.
en Twist-Pad with Twist knob jTwist-Pad with Twist knob The twistpad is the area in which you can use the twist knob to select the hotplates and heat settings. The twist knob automatically centres itself in the twistpad area. The twist knob is magnetic and is placed on top of the twistpad. To activate a hotplate, touch the twist knob at the level for the required hotplate. Turning the twist knob selects the heat setting. Twi st - Pad wi t h Twi st knob Remove the twist knob.
Operating the appliance 1Operating the appliance This chapter explains how to set a hotplate. The table shows heat settings and cooking times for various meals. en Changing the heat setting Select the hotplate and change the heat setting using the twist knob. Oper at i ng t he ap l i ance Switching the hob on and off Switch the hob on and off using the main switch. To switch on: Touch the # symbol. The symbols for the hotplates and the functions available at this time light up.
en Operating the appliance Cooking table The table shows which heat setting is suitable for each type of food. The cooking time may vary depending on the type, weight, thickness and quality of the food. Heat setting Cooking time (mins) Melting Chocolate coating Butter, honey, gelatine 1 - 1. 1-2 - Heating and keeping warm Stew, e.g. lentil stew Milk* Heating sausages in water* 1. - 2 1. - 2.
Operating the appliance Roasting/frying with little oil* Escalope, plain or breaded Escalope, frozen Chop, plain or breaded** Steak (3 cm thick) Poultry breast (2 cm thick)** Poultry breast, frozen** Rissoles (3 cm thick)** Hamburgers (2 cm thick)** Fish and fish fillet, plain Fish and fish fillet, breaded Fish, breaded and frozen, e.g. fish fingers Scampi, prawns Sautéeing fresh vegetables and mushrooms Stir-fry, vegetables, meat cut in Asian-style strips Frozen dishes, e.g.
en Flex Zone |Flex Zone You can use each flex zone as a single hotplate or as two independent hotplates, as required. It consists of four inductors that work independently of each other. If using the flexible cooking zone, only the area that is covered by cookware is activated. As two independent hotplates The flexible cooking zone is used like two independent hotplates.
Move function uMove function This function activates the entire flexible cooking zone, which is divided into three cooking areas and which has preset heat settings. Only use one item of cookware. The size of the cooking area depends on the cookware used and whether it is positioned correctly. Move f unct i on Cooking areas en Activation 1. Select one of the two hotplates in the flexible cooking zone. | symbol. The indicator beside the | symbol lights up.
en Time-setting options OTime-setting options Ti me- set i ng opt i ons Your hob has three timer functions: ■ ■ ■ Programming the cooking time Kitchen timer Stopwatch function Programming the cooking time The hotplate automatically switches off after the time that is set has elapsed. Setting procedure: 1. Select the hotplate and the required heat setting. 2. Touch the x symbol. The x display for the hotplate lights up. ‹‹ lights up on the timer display.
PowerBoost function Stopwatch function The stopwatch function displays the time that has elapsed since activation. This functions independently from the hotplates and from other settings. This function does not automatically switch off a hotplate. Activating Touch the œ symbol. The ‹‹ symbol and the b indicator light up in the timer display. The time begins to elapse. en vPowerBoost function The PowerBoost function enables you to heat up large quantities of water faster than when using heat setting Š.
en ShortBoost function xShortBoost function The ShortBoost function enables you to heat cookware faster than when using heat setting Š. Shor t Bo st f unct i on After deactivating the function, select the appropriate heat setting for your food. This function can always be activated for a hotplate, provided the other hotplate in the same group is not in use (see illustration). zKeep warm function This function is suitable for melting chocolate or butter and for keeping food warm.
Frying Sensor en cFrying Sensor This function can be used to fry food while maintaining the suitable frying pan temperature. The cooking zones that have this function are identified by the roasting function symbol. Fr yi ng Sensor Advantages when frying ■ ■ The hotplate only heats up if this is required to maintain the temperature. This saves energy and prevents the oil or fat from overheating.
en Frying Sensor Temperature settings Temperature level 1 very low 2 low 3 medium - low 4 medium - high 5 high Suitable for Preparing and reducing sauces, stewing vegetables and frying food in extra virgin olive oil, butter or margarine. Frying food in extra virgin olive oil, butter or margarine, e.g. omelettes. Frying fish and thick food such as meatballs and sausages. Frying steaks (well done), breaded frozen products, and thin food such as schnitzel, strips of meat and vegetables.
Frying Sensor en Temperature setting Total frying time after the signal tone sounds (min) Fish fillet, plain1 4 10 - 20 Fish fillet, breaded1 3 10 - 20 Prawns1 4 4-8 Scampi1 4 4-8 Frying fish, whole1 3 10 - 20 Fried eggs in butter4 2 2-6 Fried eggs in oil2 4 2-6 Scrambled eggs3 2 4-9 Omelettes5 2 3-6 Pancakes5 5 1,5 - 2,5 French toast5 3 4-8 Shredded raisin pancake5 3 10 - 15 Garlic3 2 2 - 10 Glazed onion3 2 2 - 10 Onion rings3 3 5 - 10 Courgette1 3 4 - 12
en Frying Sensor Temperature setting Total frying time after the signal tone sounds (min) Tomato sauce with vegetables3 1 25 - 35 Béchamel sauce3 1 10 - 20 Cheese sauce3 1 10 - 20 Reducing sauces3 1 25 - 35 Sweet sauces3 1 15 - 25 Escalope1 4 15 - 20 Cordon bleu1 4 10 - 30 Poultry breast1 4 10 - 30 Chicken nuggets1 4 10 - 15 Gyros3 4 10 - 15 Kebab3 4 10 - 15 Fish fillet, plain1 3 10 - 20 Fish fillet, breaded1 3 10 - 20 Fish fingers1 4 8 - 12 French fries3 5 4-6
Frying Sensor en Teppan Yaki and Grill for the Flex Zone «Teppan Yaki ¬Grill The Teppan Yaki enables you to cook meat, fish, seafood, vegetables, desserts and bread with very little oil, easily and healthily. The Teppan Yaki adapts perfectly to the Flex Zone. Direct contact with the plate and uniform heat transfer make it possible to retain the consistency, colour and succulence of the food when searing and browning. The following table shows a selection of dishes and is arranged by food type.
en Frying Sensor Cookware Temperature level Total frying time after the signal tone sounds (min) Courgettes1 «/¬ 3 4 - 12 Aubergines1 «/¬ 3 4 - 12 Peppers1 «/¬ 3 4 - 15 Frying green asparagus1 «/¬ 3 4 - 15 Mushrooms2 «/¬ 4 10 - 15 Garlic2 « 2 2 - 10 Sweating onions2 « 2 2 - 10 Glazing vegetables2 « 3 6 - 10 Fried potatoes (made from unpeeled boiled potatoes)2 « 5 6 - 12 Potato pancakes4 « 5 2,5 - 3,5 Glazed potatoes2 « 3 10 - 15 Fried eggs in butter3 « 2 2-
Childproof lock Setting procedure Select the appropriate temperature level from the table. Set an empty item of cookware down on the cooking zone. 1. Select the hotplate and touch the lights up in the hotplate display. en AChildproof lock You can use the childproof lock to prevent children from switching on the hob. Chi l dpr o f l ock Û symbol. Û Activating and deactivating the childproof lock The hob must be switched off. To activate: Touch the . symbol for approx. 4 seconds.
en Wipe protection kWipe protection Wiping over the control panel while the hob is switched on may alter the settings. To avoid doing this, you can use the hob's "Lock control panel for cleaning" function. To activate this function: Remove the twist knob. The z indicator will be lit.The control panel will remain locked for 35 seconds. You will now be able to clean the surface of the control panel without altering the settings.
Basic settings en QBasic settings The appliance has various basic settings. These basic settings can be altered to suit your individual requirements. Basi c set i ngs Indicator/ symbol Function ™‚ Childproof lock ‹ ‚ ƒ ™ƒ Signal tones ‹ ‚ ƒ „ ™„ Confirmation and fault signals are switched off. Only the fault signal is switched on. Only the confirmation signal is switched on. All signal tones are switched on.* Display energy consumption ‹ ‚ ™† Manual*. Automatic. Function deactivated.
Basic settings en ™‚ƒ Check the cookware and the cooking results ‹ ‚ ƒ ™‹ Not suitable Not perfect Suitable Restore to standard settings ‹ ‚ Individual settings.* Restore factory settings. *Factory setting **The hob's maximum power output is shown on the rating plate. -------- To access the basic settings: 6. Touch the The hob must be off. The settings have been saved. 1. Switch on the hob. 2. Within ten seconds, touch and hold the .
Energy consumption indicator [Energy consumption indicator This function indicates the total amount of energy consumed by this hob the last time it was used for cooking. Once the hob is switched off, the energy consumption is displayed in kilowatt hours (e.g. ‚.‹‰ kWh) for 10 seconds. The accuracy of the information displayed depends on the voltage quality of the mains power supply, among other factors.
en Power manager hPower manager You can use the power manager to set the total power of the hob. The hob is preset at the factory. Its maximum performance is specified on the rating plate. You can use the power manager to change the value in accordance with the requirements for the relevant electrical installation. In order not to exceed this set value, the hob automatically distributes the power available between the cooking zones that are switched on.
Home Connect Automatic registration in the home network You require a router that has WPS functionality. You require access to your router.If you do not have this, follow the steps for "Manually logging into your home network". 1. Switch on the hob. 2. Touch and hold the . symbol for 3 seconds. The product information is displayed. 3. Touch the . symbol repeatedly until the •’‚ setting appears. ‹ lights up on the cooking position display. en Manual registration in the home network 1. Switch on the hob.
Home Connect en The appliance automatically tries to connect to the app and the setting •’ƒ is displayed. The value ‚ flashes in the control panel. Symbol Function •’ˆ ‹ ‚ ƒ „ WLAN signal strength •’‰ ‹ ‚ Connection to Home Connect server Not connected to home network (WLAN). Signal strength 1 (poor) Signal strength 2 (moderate) Signal strength 3 (good) Not connected. Connected. * Basic setting 6. Start the app on the mobile device and follow the instructions for manual network registration.
Home Connect Disconnecting from the network Di scon ect i ng f r om t he net wor k You can disconnect your hob from the network at any time. Note: If your hob is disconnected from the network, it is not possible to operate it using Home Connect. en 1. Switch on the hob. 2. Touch and hold the . symbol for 3 seconds. The product information is displayed. 3. Touch the . symbol repeatedly until the •’ƒ setting appears. ‹ lights up on the cooking position display. 1. Switch on the hob. 2.
en Home Connect Confirming settings As soon as cooking settings are transmitted to a cooking zone, the cooking zone display, timer display or modified function starts, depending on the setting. To confirm these settings, touch the twist knob in the appropriate area for the cooking position required. To discard the settings, touch any other button on the hob. Software update Using the software update function, your hob's software can be updated (e.g.
Hood connection eHood connection Ho d con ect i on You can connect this appliance to a suitable extractor hood and then control the functions of the hood via your hob. You have various options for connecting the appliances together: Home Connect Two appliances can be connected using the Home Connect app provided that both of them are Home Connect-compatible. Both appliances can be controlled via the app and via the control panel.
en Hood connection Connecting via your home network You require a router that has WPS functionality. You require access to your router.If you do not have this, follow the steps for "Direct connection". When you begin, make sure that the extractor hood is connected to the app or is on your home network. Control the hood via the hob 1. Switch on the hob. 2. Touch and hold the Setting the fan . symbol for 3 seconds.
Cleaning Hood control settings Ho d cont r ol set i ngs You can adapt the hood controls to suit your needs at any time. Symbol Function ™‚‡ ‹ ‚ ƒ „ Hob-hood connection ™‚‰ ‹ Automatic fan switch-on ‚ ƒ Not connected / disconnect. Connect. Connected to home network (WLAN). Connected to extractor hood. Switched off. The hood must be switched on manually if needed. Switched on in automatic mode.* In automatic mode, the hood switches itself on when a cooking zone is switched on.
en Frequently Asked Questions (FAQ) {Frequently Asked Questions (FAQ) Fr equent l y Asked Quest i ons ( FAQ) Use Why can't I switch on the hob and why is the childproof lock symbol lit? The childproof lock is now active. You can find information about this function in section ~ "Childproof lock" Why are the indicators flashing and why can I hear a signal tone? Remove any liquid or remnants of food from the control panel. Remove any objects from the control panel.
Frequently Asked Questions (FAQ) en Cookware Which types of cookware can be used with an induction hob? You can find information on which types of cookware can be used with an induction hob in the section on ~ "Induction cooking". Why is the hotplate not heating up and why is the heat setting flashing? The hotplate on which the cookware is standing is not switched on. Check that you have switched on the correct hotplate.
en Trouble shooting 3Trouble shooting Usually, faults are small matters that are easy to eliminate. Please read the information in the table before calling the after-sales service. Tr oubl e sho t i ng Indicator/symbol None The indicators are flashing Ù is flashing on the cooking zone displays ”ƒ / “ˆ‹‚† ”… / “ˆ‹‚† ”† + heat setting and signal tone ”† and signal tone ”‚ / ”‡ ”‰ “ˆ‹‚‹ “Š‹‹‹ “Š‹‚‹ —…‹‹ š“ Possible cause The power supply has been disconnected.
Customer service en 4Customer service Our after-sales service is there for you if your appliance needs to be repaired. We will always find an appropriate solution, also in order to avoid after-sales personnel having to make unnecessary visits. Cust omer ser vi ce E number and FD number Please quote the E number (product number) and the FD number (production number) of your appliance when contacting the after-sales service.
en Test dishes ETest dishes This table has been produced for test institutes to facilitate the testing of our appliances. The data in the table refer to our Schulte-Ufer cookware accessories (4-piece cooking set for induction hob Z9442X0) with the following dimensions: Test di shes ■ ■ ■ ■ Saucepan: 16 cm Ø, 1.2 l for 14.5 cm Ø hotplates Pot: 16 cm Ø, 1.7 l for 14.5 cm Ø hotplates Pot: 22 cm Ø, 4.
Test dishes Test dishes Preheating Heat set- Cooking time Cookware Lid ting (min:sec) Cooking rice pudding Rice pudding, cooked with the lid on Temperature of the milk: 7 ºC Heat the milk until it starts to rise up. Set the recommended heat setting and add rice, sugar and salt to the milk. The cooking time, including preheating, is approx. 45 minutes. Ingredients: 190 g short-grain rice, 90 g sugar, 750 ml milk (3.
Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd.
