Home Connect Leaflet

NO12
Trinn 2.2: Koble platetoppen til det
trådløse hjemmenettverket (Wi-Fi) trinn for
trinn
Du må bare følge instruksjonene i trinn 2.2 når appen
oppfordrer deg til det. Trinnene nedenfor beskriver
betjeningen av husholdningsapparatet.
1 | For å åpne grunninnstillingene trykker du på
Home Connect en
31
Manual registration in the home network
1. Touch the 0 sensor and then select
option 4 MyProfile, to open the basic settings.
2. Touch the "Home Connect" setting.
3. Touch "Use assistant to configure settings" to launch
the Home Connect assistant.
You will be asked to press the WPS button on your
router.
4. Select "WPS not supported".
5. Read the message and touch "Start" to continue.
6. Open the network settings on your mobile device
and use the SSID "Home Connect" and the key
"Home Connect" to log your mobile device into the
hob network.
Note: If it is unable to connect, relaunch the
assistant and manually log the appliance into your
home network.
7. Follow the prompt in the app and enter the name
and password for your home network (Wi-Fi).
A message will appear to say that the appliance can
now be connected to the app.
8. Touch "Next" to begin the process of connecting to
the app.
Once the login process is complete, a message will
appear to say that it has been successful. The
D symbol will appear in the main area on the control
panel.
:36QRWVXSSRUWHG
$XWRPDWLFQHWZRUNORJLQ
$FWLYDWH:36IXQFWLRQRQURXWHU
PLQ_V
1H[W
&RQQHFWWRQHWZRUN
6XFFHVVIXOO\FRQQHFWHGWRQHWZRUN
&RQQHFWWRDSS
-sensoren og
velger alternativet
Home Connect en
31
Manual registration in the home network
1. Touch the 0 sensor and then select
option 4 MyProfile, to open the basic settings.
2. Touch the "Home Connect" setting.
3. Touch "Use assistant to configure settings" to launch
the Home Connect assistant.
You will be asked to press the WPS button on your
router.
4. Select "WPS not supported".
5. Read the message and touch "Start" to continue.
6. Open the network settings on your mobile device
and use the SSID "Home Connect" and the key
"Home Connect" to log your mobile device into the
hob network.
Note: If it is unable to connect, relaunch the
assistant and manually log the appliance into your
home network.
7. Follow the prompt in the app and enter the name
and password for your home network (Wi-Fi).
A message will appear to say that the appliance can
now be connected to the app.
8. Touch "Next" to begin the process of connecting to
the app.
Once the login process is complete, a message will
appear to say that it has been successful. The
D symbol will appear in the main area on the control
panel.
:36QRWVXSSRUWHG
$XWRPDWLFQHWZRUNORJLQ
$FWLYDWH:36IXQFWLRQRQURXWHU
PLQ_V
1H[W
&RQQHFWWRQHWZRUN
6XFFHVVIXOO\FRQQHFWHGWRQHWZRUN
&RQQHFWWRDSS
MyProle.
2 | Trykk på "Home Connect"-innstillingen.
3 | Trykk på "Still inn med assistent" for å starte Home
Connect-assistenten.
4 | Les meldingen og trykk på "Neste" for å fortsette.
5 | Velg "WPS ikke støttet" hvis du blir bedt om å trykke på
WPS-knappen på ruteren.
6 | Les meldingen og trykk på "Start" for å fortsette.
Apparatet åpner et midlertidig WLAN-nettverk ved navn
"HomeConnect" og passordet "HomeConnect". Det er åpent
inoen minutter.
Ved hjelp av dette midlertidige WLAN-nettverket vil
appen sende hjemmenettverkets navn (SSID) og
passord til platetoppen slik at den kan kobles til
nettverket.
Etter noen sekunder vises det en melding som bekrefter
at prosessen er fullført. Platetoppen er koblet til WLAN-
hjemmenettverket (Wi-Fi).
7 | Følg instruksjonene i appen.