Home Connect Leaflet

DA6
Trin 2.2: Forbind kogesektionen trin-for-
trin med WLAN-hjemmenetværket (Wi-Fi)
Følg kun anvisningerne i trin 2.2, når app'en opfordrer
til det. Følgende trin beskriver betjeningen på
husholdningsapparatet.
1 | Berør
Home Connect en
31
Manual registration in the home network
1. Touch the 0 sensor and then select
option 4 MyProfile, to open the basic settings.
2. Touch the "Home Connect" setting.
3. Touch "Use assistant to configure settings" to launch
the Home Connect assistant.
You will be asked to press the WPS button on your
router.
4. Select "WPS not supported".
5. Read the message and touch "Start" to continue.
6. Open the network settings on your mobile device
and use the SSID "Home Connect" and the key
"Home Connect" to log your mobile device into the
hob network.
Note: If it is unable to connect, relaunch the
assistant and manually log the appliance into your
home network.
7. Follow the prompt in the app and enter the name
and password for your home network (Wi-Fi).
A message will appear to say that the appliance can
now be connected to the app.
8. Touch "Next" to begin the process of connecting to
the app.
Once the login process is complete, a message will
appear to say that it has been successful. The
D symbol will appear in the main area on the control
panel.
:36QRWVXSSRUWHG
$XWRPDWLFQHWZRUNORJLQ
$FWLYDWH:36IXQFWLRQRQURXWHU
PLQ_V
1H[W
&RQQHFWWRQHWZRUN
6XFFHVVIXOO\FRQQHFWHGWRQHWZRUN
&RQQHFWWRDSS
sensoren, og vælg
Home Connect en
31
Manual registration in the home network
1. Touch the 0 sensor and then select
option 4 MyProfile, to open the basic settings.
2. Touch the "Home Connect" setting.
3. Touch "Use assistant to configure settings" to launch
the Home Connect assistant.
You will be asked to press the WPS button on your
router.
4. Select "WPS not supported".
5. Read the message and touch "Start" to continue.
6. Open the network settings on your mobile device
and use the SSID "Home Connect" and the key
"Home Connect" to log your mobile device into the
hob network.
Note: If it is unable to connect, relaunch the
assistant and manually log the appliance into your
home network.
7. Follow the prompt in the app and enter the name
and password for your home network (Wi-Fi).
A message will appear to say that the appliance can
now be connected to the app.
8. Touch "Next" to begin the process of connecting to
the app.
Once the login process is complete, a message will
appear to say that it has been successful. The
D symbol will appear in the main area on the control
panel.
:36QRWVXSSRUWHG
$XWRPDWLFQHWZRUNORJLQ
$FWLYDWH:36IXQFWLRQRQURXWHU
PLQ_V
1H[W
&RQQHFWWRQHWZRUN
6XFFHVVIXOO\FRQQHFWHGWRQHWZRUN
&RQQHFWWRDSS
MyProle for at åbne
grundindstillingerne.
2 | Berør "HomeConnect" indstilling.
3 | Berør "Indstil med assistent" for at starte HomeConnect
assistenten.
4 | Læs meddelelsen, og berør "Fortsæt" for at fortsætte.
5 | Vælg "Ingen WPS-funktion", hvis der vises en opfordring til
at trykke på WPS-knappen på routeren.
6 | Læs meddelelsen, og berør "Start" for at fortsætte.
Apparatet åbner et temporært WLAN-netværk med navnet
"HomeConnect" og password "HomeConnect" i nogle
minutter.
Via dette temporære WLAN-netværk overfører
app'en navnet (SSID) og password for
hjemmenetværket til kogesektionen og gør det
dermed muligt for den at oprette forbindelse til
hjemmenetværket.
Efter et par sekunder vises en meddelelse for at bekræfte,
at forbindelsen blev oprettet korrekt. Kogesektionen er
forbundet med WLAN hjemmenetværket (Wi-Fi).
7 | Følg anvisningerne i app'en.