Instructions for Use

Cleaning function en
19
.Cleaning function
Cl eani ng function Your appliance comes with the EasyClean cleaning aid.
The EasyClean cleaning aid makes it easier to clean the
cooking compartment.
EasyClean
The EasyClean cleaning aid makes it easier to clean the
cooking compartment. Dirt is softened beforehand by
vaporizing soapy water. It can then be removed more
easily.
:Warning – Risk of scalding!
Water in a hot cooking compartment may create hot
steam. Never pour water into the cooking compartment
when the cooking compartment is hot.
Setting the cleaning aid
Note: Only use the EasyClean š cleaning aid when the
cooking compartment has cooled down. Allow the
cooking compartment to completely cool down.
1. Remove the accessories from the cooking
compartment.
2. Mix 0.4 litres water (not distilled water) with a drop of
washing-up liquid and pour into the middle of the
cooking compartment floor.
3. Use the function selector and temperature selector
to set EasyClean š.
The duration is shown in the display.
The cleaning aid starts after a few seconds. The
duration counts down in the display.
Notes
■ The duration is preset and cannot be changed.
■ The end time cannot be delayed.
If œ flashes in the display after switching on, the cooking
compartment has not cooled completely. Switch off the
appliance. Wait until ¬¬ appears in the display and
switch the cleaning aid on again.
Once the cleaning aid has run through to the end, an
audible signal sounds.
Subsequent cleaning
The remaining water in the cooking compartment must
be removed promptly. Do not leave the remaining water
in the cooking compartment for an extended period
(e.g. overnight). The appliance must not be operated
when the cooking compartment is still wet or damp.
1. Open the appliance door and remove the remaining
water with an absorbent sponge cloth.
2. Clean the smooth surfaces in the cooking
compartment with a dish cloth or a soft brush.
Stubborn residues can be removed using a stainless
steel scouring pad.
3. Remove limescale with a cloth soaked in vinegar.
Then wipe with clean water and rub dry with a soft
cloth (including under the door seal).
4. To switch off, turn the function selector to the "Off"
position.
5. Leave the appliance door ajar in the stop position
(approx. 30°) for approx. one hour to allow the
enamel surfaces in the cooking compartment to dry
thoroughly. Alternatively, you can also run the rapid
drying function for the cooking compartment.
Running the rapid drying function for the cooking
compartment
1. After the cleaning aid has been run through, leave
the appliance door ajar in the stop position (approx.
30°).
2. Start CircoTherm hot air with 50 °C.
3. After five minutes, switch off the appliance and close
the appliance door.
Removing heavy deposits of dirt
You have several options for removing particularly
stubborn deposits of dirt.
■ Leave the soapy water to work for some time before
starting the cleaning aid.
■ Rub soapy water onto the dirt on the smooth
surfaces before starting the cleaning aid.
■ Repeat the cleaning aid after the cooking
compartment has cooled down.