WASHING MACHINE en Instruction Manual and Installation Instructions
Your new washing machine Display rules You have chosen a Neff washing machine. : Warning! Please take a few minutes to read and become familiar with the advantages of your washing machine. To meet the high quality demands required by Neff, every washing machine that leaves our factory is carefully checked to ensure that it functions correctly and is in perfect condition. For more information on our products, accessories, replacement parts and services, see our website www.neff-international.
en Contents no i t cur t sen I l aunaM dna 8 Intended use. . . . . . . . . . . . . . . . .4 ( Safety instructions . . . . . . . . . . .5 Electrical safety. . . . . . . . . . . . . . . . . . 5 Risk of injury . . . . . . . . . . . . . . . . . . . . 5 Safety for children. . . . . . . . . . . . . . . . 5 7 Environmental protection . . . . . .7 Packaging/used appliance . . . . . . . . . 7 Tips on economical use . . . . . . . . . . . 7 * Getting to know the appliance . 8 Washing machine . . . . . . . . . .
en Intended use 4 After-sales service . . . . . . . . . . 25 J Technical data . . . . . . . . . . . . . . 26 5 Positioning and connecting. . . 26 Included with the appliance . . . . Safety instructions . . . . . . . . . . . Installation surface . . . . . . . . . . . Installation on a base or a wooden joist floor . . . . . . . . Installation on a platform with drawer . . . . . . . . . . . . . . . . Installing the appliance in a kitchenette . . . . . . . . . . . . . Removing the transport locks . .
Safety instructions ( Safety instructions Electrical safety sno i t cur t sn i y t e f aS : Warning Danger of death! There is a risk of electric shock if you touch live components. ■ Never touch or hold the mains plug with wet hands. ■ Only pull out the mains cable by the plug and never by the cable, as this could damage it. Risk of injury : Warning Risk of injury! When the washing machine is lifted by its protruding parts (e.g.
en Safety instructions : Warning Danger of death! Children may lock themselves in appliances, putting their lives at risk. For appliances that have reached the end of their service life: ■ Disconnect the mains plug. ■ Cut through the mains cable and remove it, along with plug. ■ Destroy the lock on the washing machine door. : Warning Risk of suffocation! Children may become wrapped in packaging/film or packing parts if allowed to play with them, or they may pull them over their heads and suffocate.
Environmental protection 7 Environmental protection Tips on economical use ■ Packaging/used appliance no i t ce t orp l a t nemnor i vnE ) Dispose of packaging in an environmentally-responsible manner. This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment - WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.
en Getting to know the appliance * Getting to know the appliance Washing machine ecna i l p a eh t wonk o t gn i t eG 6 7 # ( Detergent drawer 9S Open the washing machine door 0 Control/display panel 9T Close the washing machine door 8 Washing machine door with handle @ Service flap with or without a drainage hose* * Depending on the model 8
Getting to know the appliance en Control panel Note: You can find possible programme default settings and additional programme settings in the overview; these differ depending on the model. # + ( Programme selector for selecting @ Additional programme settings: SpeedPerfect (, EcoPerfect à, Easy Iron, a programme and switching the machine on and off via the Off position. Water Plus or Extra Rinse. Selecting additional programme settings ~ Page 13.
en Laundry Prepare the laundry y r dnuaL Caution! Damage to the appliance/fabrics Foreign objects (e.g. coins, paper-clips, needles, nails) may damage the laundry or components in the washing machine. Therefore, note the following tips when preparing your laundry: ■ Empty pockets. ■ ■ ■ ■ ■ ■ Look out for metal items (paperclips, etc.) and remove them. Wash delicates in a laundry bag (tights, underwired bras, etc.). Close any zips, button up any cover buttons. Brush sand out of pockets and collars.
Detergent Dyeing/bleaching Dye should only be used in normal household quantities. Salt may damage stainless steel. Always follow the dye manufacturer's instructions. Do not use the washing machine to bleach clothes. Soaking 1. Pour soaking agent/detergent into 2. 3. 4. 5. compartment II according to the manufacturer’s instructions. Turn the programme selector to the Cottons 30 °C programme. Press the start button. After approx. 10 minutes, press the start button again to pause the programme.
en Programme default settings Saving Soiling/note Reduced temperature and detergent quantity as per the recommended dosage Light No visible dirt or stains. Clothing has taken on some body odour, e.g.: ■ Light summer/sports clothing (worn for a few hours) ■ T-shirts, shirts, blouses (worn for up to one day) ■ Guest bed linen and hand towels (used for one day) Normal Visible dirt or a few light stains, e.g.
Additional programme settings Ready in time (0) Before starting the programme, the programme end Ready in time can be preselected in hourly increments (h = hours) up to a maximum of 24 hours. 1. Select the required programme. Note: The programme duration is displayed in the display panel. 2. Press the Ready in button repeatedly until the required number of hours is displayed in the display panel. 3. Press the Start button. The set Ready in time is now active.
en Operating the appliance Water Plus Increased water level and additional rinse cycle, extended washing time. For areas with very soft water or for an even better rinsing result. Easy Iron (Less Ironing; Q) For gentle final spin with subsequent fluffing. Residual moisture in the laundry is slightly increased. 1 Operating the appliance Preparing the washing machine ecna i l p a eh t gn i t arepO Note: The washing machine must be correctly installed and connected. From ~ Page 26. 1. 2. 3. 4.
Operating the appliance ■ Observe the maximum specified load. Overfilling has a negative impact on the washing result and promotes creasing. 1. Unfold presorted items of laundry before placing them in the washing drum. 2. Make sure that no items of laundry are trapped between the washing machine door and the rubber seal, and close the door. en Filling : Warning Eye/skin irritation! Detergent and care products may spray out if the detergent drawer is opened while the machine is in operation.
en Operating the appliance Measuring aid* for liquid detergent *Depending on the model Position the measuring aid for measuring liquid detergent: 1. Pull out the detergent drawer. Press down the insert and fully remove the drawer. 2. Slide the measuring aid forwards, fold it down and click it into place. 3. Reinsert the drawer. Note: Do not use the measuring aid for gel detergents and washing powder, or for programmes with prewash or when the Ready in time is selected.
Operating the appliance NO lights up, it is not possible to add laundry. For safety reasons, the washing machine door remains locked when the water level or temperature is high, or while the drum is rotating, and it is not possible to add laundry during this time. 2. To continue the programme, press the Start button. – Changing the programme 1. Press the Start button to pause the programme. 2. Select a different programme. 3. Press the Start button again. The new programme starts from the beginning.
en Sensors H Sensors Automatic load sensing s rosneS The automatic load sensing function adapts the water consumption ideally to each programme depending on the type of fabric and the load. Unbalanced load detection system The automatic unbalanced load detection system detects imbalances and ensures even distribution of the laundry by repeatedly starting and stopping drum spinning.
Setting the signal en M Setting the signal l ang i s eh t gn i t eS 1. Set the button and information signals Set the programme selector to the Off position and then turn the dial one position to the right. Press the button for Eco Perfect à, hold it down and, at the same time, turn the programme selector one further position to the right. 2. Set the volume for button signals The current signal volume now appears as a fig- Go to point 3 to set the Set the programme selector to ure.
en Cleaning and maintenance 2 Cleaning and maintenance : Warning Danger of death! There is a risk of electric shock if you touch live components. Switch off the appliance and unplug the mains plug. ecnane t n i am dna gn i nae lC : Warning Risk of poisoning! Toxic vapours can be produced by cleaning agents that contain solvents, e.g. cleaning solvent. Do not use cleaning agents that contain solvents. Caution! Damage to the appliance Cleaning agents that contain solvents, e.g.
Cleaning and maintenance en Allow the detergent solution to cool down. 1. Turn off the water tap so that no more water can flow in and has to be drained via the detergent solution pump. 2. Switch off the appliance and pull out the mains plug. 3. Open and remove the service flap. 4. Fold out the water gutter in front of the pump cover. 5. – – Remove the drainage hose from its holder and remove the sealing cap. Allow the detergent solution to flow out into a suitable container.
en Faults and what to do about them. The drain hose at the siphon is blocked 6. For standard and Aqua-Secure models, clean the filter on the rear of the appliance: Remove the hose from the rear of the appliance, Remove the filter using pliers and clean the filter. 1. Switch off the appliance. Disconnect the mains plug. 2. Loosen the hose clamp. Carefully remove the drain hose, residual water may leak out. 3. Clean the drainage hose and siphon connecting piece. 7.
Faults and what to do about them. en Caution! Water damage Any escaping water may cause water damage. Do not open the washing machine door if water can be seen through the glass. 1. Set the programme selector to the Off position. Remove the mains plug. 2. Drain the water. Pull the emergency release downwards with a tool and release. The washing machine door can then be opened.
en Faults and what to do about them. Faults and what to do about them. Faults Cause/remedial action Water is running out. ■ ■ Water not flowing in. Detergent is not dispensed. ■ ■ ■ ■ Washing machine door cannot be opened. ■ ■ ■ Programme does not start. ■ ■ ■ Detergent solution is not drained. ■ ■ ■ Water not visible in the drum. The spin result is not satisfactory. Laundry wet/too damp. The programme takes longer than usual.
After-sales service Faults Cause/remedial action Intense noise, vibrations and "wandering" during spinning. ■ ■ ■ Display panel/indicator lights do not function while the appliance is running. Detergent residue on the washing. en ■ ■ ■ ■ ■ Appliance aligned? Align the appliance. Appliance feet fixed? Secure the appliance feet. Transport locks removed? Remove the transport locks. Power failure? Circuit breakers tripped? Switch the circuit breakers back on or replace them.
en Technical data J Technical data Dimensions: 60 x 55 x 85 cm (width x depth x height) Weight: 66 - 73 kg* Mains connection: Nominal voltage: 220-240 V, 50 Hz Nominal current: 10 A / 13 A* Nominal power: 2300 W a t a d l a c i n h c eT Water pressure: 100 - 1000 kPa (1-10 bar) * Depending on the model Power consumption when switched off: 0.17 W Power consumption when ready for use (left-on mode): 2.
Positioning and connecting In addition, a hose clamp (24-40 mm diameter, available from specialist dealers) is required to connect the water drain hose to a siphon. Useful tools Spirit level for levelling ■ Spanner with: – WAF 13 for loosening the transport locks, and – WAF 17 for aligning the appliance feet ■ Safety instructions : Warning Risk of injury! The washing machine is very heavy. Be careful when lifting/transporting the washing machine.
en Positioning and connecting Installing the appliance in a kitchenette Note: Keep the screws and sleeves in a safe place. : Warning Risk of death! There is a risk of electric shock if you touch live components. Disconnect the appliance from the power supply. Notes ■ Recess width of 60 cm required. ■ Only install the washing machine underneath a continuous worktop that is securely connected to adjacent cabinets.
Positioning and connecting Hose and cable lengths ■ en Observe the following when connecting the machine: Left-hand connection Notes With a cold water connection, only operate the washing machine using cold mains water. ■ With a hot water connection, operate the washing machine with hot and cold mains water, with a maximum temperature of 60 °C. ■ Do not connect the machine to the mixer tap of an unpressurised hot-water boiler. ■ Do not use a used supply hose.
en Positioning and connecting Connection to the water pipes (¾" = 26.4 mm) Connection to the appliance Cold water connection only If no hot water connection is present, only connect the cold water inlet hose and cover the hot water connection on the appliance so that it is kept free of dirt Note: Carefully turn on the tap and check that the connection points are not leaking. The screw connection is under water pipe pressure. Cold water connection Connect the water supply hose to the water tap (¾" = 26.
Positioning and connecting You can lay the water drain hose as follows: ■ Outlet in a sink ■ en Outlet into a plastic pipe with rubber bushing or into a drainage pit : Warning Risk of scalding! When you are washing at high temperatures, there is a risk of scalding if you come into contact with hot detergent solution e.g. if hot detergent solution is being drained into a wash basin. Do not reach into the hot detergent solution.
en Positioning and connecting Electrical connection : Warning Danger of death! There is a risk of electric shock if you touch live components. ■ Never touch or hold the mains plug with wet hands. ■ Only pull out the mains cable by the plug and never by the cable, as this could damage it. ■ Never unplug the mains plug during operation. Observe the following information and ensure that: Notes ■ The mains voltage and voltage indicated on the washing machine (rating plate) are the same.
Positioning and connecting en Transportation Before commissioning: e.g. when moving home Notes ■ The transport locks must be removed. ■ To prevent unused detergent from flowing straight into the drain during the next wash: Pour approx. 2 litre of water into compartment II and start the Abpumpen (Empty) programme. Preparatory work: 1. Turn off the water tap. 2. Reduce the water pressure in the supply hose. Maintenance – filter in the water supply ~ Page 22 3. Drain the remaining detergent solution.
6
Aqua-Stop warranty Only for appliances with Aqua-Stop In addition to warranty claims against the vendor based on the purchase agreement and to our appliance warranty, we will provide compensation under the following conditions: 1. If water damage is caused due to a fault in our Aqua-Stop system, we will compensate domestic customers for the damage caused. 2. The liability guarantee is valid for the service life of the appliance. 3.
Constructa Neff Vertriebs-GmbH Carl-Wery-Straße 34 D-81739 München Repair order and advice in the event of faults GB IE 0844 892 8989 Calls from a BT landline will be charged at up to 3 pence per minute. A call set-up fee of up to 6 pence may apply. 01450 2655 0.03 € per minute at peak. Off peak 0.0088 € per minute. You can find the contact information for all countries in the attached after-sales service directory: www.neff-international.
