Operation Manual

35Chapter 6 .
Camera and Photos
1. Touch and hold the or Volume button to start the burst sequence. The number of captured photos
will be displayed in the bottom of the viewfinder.
2. Release or Volume button to stop the burst shooting.
3. Tap the image thumbnail or go to Photos -> Camera to view the photos.
Note:
1. This feature is not available in Panorama mode, Face beauty mode.
2. You can take up to 40 photos in one burst sequence, provided that there is enough storage space on your phone.
6. 5 Camera and video settings
Go to Camera -> to configure the following camera settings.
Camera settings
Tap to set the camera:
• GPS location info: Save the location where the photo was taken (Only when your phone is connected to the
Internet).
1 ) Turn the switch on and then take a photo.
2 ) Go to Photos, select the photo and tap to view the location information.
• Exposure: This setting changes the brightness of the image. Select the exposure to adjust the exposure
compensation.
• Color effect: Select a color effect to help your image apply different color effects.
• Scene mode: Select a scene mode, such as Night, Sunset, Party, Portrait and so on.
• White balance: Tap to select a white balance. You can choose from Auto, Incandescent, Daylight,
Fluorescent, Cloudy, Twilight, Shade or Warm fluorescent.
• Image properties: You can adjust the Sharpness, Hue, Saturation, Brightness and Contrast to make your
image look more vivid.
• Anti-flicker: Tap to select the anti-flicker Auto, Off, 50Hz or 60Hz.
• Volume keys:
• Tap to set the volume keys as Shoot, you can use the Volume button to shoot.
• Tap to set the volume keys as Zoom, you can use the Volume button to adjust the focal length.
• Tap to set the volume keys as Volume, you can just use the Volume button to adjust the volume.
• Shutter sound: When Shutter sound is on, a shutter sound is played during taking a picture or recording a
video.
• Restore defaults: Tap to restore camera settings.
Capture Photos settings
Tap to set the photos:
• Zero shutter delay: Turn on this switch, you can take photos with faster snapshots.
• Face detection: Turn on this switch, the phone can auto-detect when a face is located in your viewfinder.
• Auto scene detection: Turn on this switch, the phone can get more accurate scene detection.
• Self timer: Set self timer, such as Off, 2 seconds or 10 seconds.
• Capture number: Set capture number as 40 shots or 99 shots.
• Picture size: Set picture size, such as QVGA, VGA,1M pixels, 1.3M pixels, 2M pixels, 3M pixels, 5M pixels.
• Preview size: Set preview size, such as Full screen or Standard(4:3).
• ISO: The ISO determines the camera's sensitivity to light. Increasing the ISO will create a brighter image, but
there will be a noticeable increase in noise. Tap to select a ISO, you can choose from Auto, 100, 200, 400
and 800.