Operation Manual

20Chapter 3 .
Network and Share
• Install certificates: Tap Install certificates and follow the onscreen instructions to install certificates.
• View MAC and IP address: On the Advabced, you can view your MAC and IP address.
WLAN direct
Use WLAN direct to transfer files between your phone and another device without connecting to a WLAN
network. WLAN direct is similar to Bluetooth but offers faster transfer speeds, making it suitable for the transfer
of larger files such as videos.
Note:
1. Using WLAN direct to transfer files needs third-party applications support.
2. Before using this function, check that both two devices you want to connect support WLAN direct.
• Connect two devices using WLAN direct
1. Switch on WLAN on both two devices.
2. Go to WLAN -> -> WLAN direct, your phone will search for devices automatically.Then keep the
WLAN direct search screen open on both devices.
3. When your phone detects the other device, select it. Follow the onscreen instructions to establish a
WLAN direct connection between the two devices.
• Rename your device
On WLAN direct screen, tap Device name. Enter the device name you want and tap OK to Save.
• Manage peer device and remembered groups
On WLAN direct screen, you can view your Peer devices and Remembered groups. Tap a peer device
and tap OK to disconnect. Tap a remembered group and tap OK to forget the group.
3. 2 Mobile data
Before using mobile data, ensure that you have a data plan with your carrier to avoid incurring excessive data
charges.
Connect to mobile data
You can connect to mobile data in following three ways:
• Swipe down from the status bar to open the Quick Settings Panel and tap . When it lights up, mobile
data is enabled.
• Swipe down from the status bar to open the Quick Settings Panel. Touch and hold to enter the mobile
data settings. Turn on the Mobile data switch.
• Go to Settings -> Dual-SIM & network and switch on Mobile data.
Note:
1. If a WLAN connection to the Internet isn’t available, apps and services may transfer data over your carrier’s cellular
network, which may result in additional fees. Contact your carrier for information about you mobile data plan rates.
2. When you don’t need to access the Internet, disable mobile data to save battery power and reduce data usage.
3. 3 Connect to computer
Transfer the data on your phone to your computer or transfer the data on your computer to your phone.
When you use a USB cable to connect your phone with a computer or another device, Allow access to device
data will be displayed in a popup dialog. Tap ALLOW to allow file transfer between your phone and the
computer. Tap DENY to deny data conncection and charge only.
Select the USB connection mode
Swipe down from the status bar to open the Notification Panel, and then tap the USB connection notification.
You can choose from the following USB connection modes: