Operation Manual

23Chapter 3 .
Network and Share
Note:
This feature is currently only supported on Neffos and in some third-party apps.
Connect to WLAN by scanning the QR code
1. On the Home screen, go to Smart WLAN-> Scan.
2. Align the QR code within the frame, or tap to select a photo to scan. Then your device will connect to
the shared WLAN automatically.
Note:
When ambient light is not enough, you can tap to turn on light.
Connect to router through WPS
WPS allows your phone to connect to a WPS-enabled router without having to remember a password.
On the Home screen, tap Smart WLAN-> WPS and press the router’s WPS button.
You also can go to Settings -> WLAN to connect. For more information, see Connect to a WLAN network
through WPS.
WLAN extender
Use WLAN extender function to extend WLAN signals to a wider area.
• Extend the WLAN
Before using this feature, ensure that you have connected to the WLAN.
On the Home screen, tap Smart WLAN -> WLAN Extender and turn on the switch. When WLAN
Extender is open, will appear in the status bar.
• Set WLAN Extender
On the Home screen, tap Smart WLAN -> WLAN Extender -> Set WLAN Extender. You can
configure following settings:
• Change the netword name: Tap Name to set netword name, and then tap SAVE. The Network name is
the WLAN Extender name. By default, this is the name of your phone model. You can manually change
the name to something that is easier to remember.
• Security: Your phone uses WPA2 PSK encryption by default.
• Configure a password that is easy to remember: The network password is generated randomly by your
phone. For security reasons, choose a password that is not easy to guess.
• Select AP Band: Tap Select AP Band to choose 2.4 GHz Band or 5 GHz Band.
• Set Maximum connections: Tap Maximum connection to choose the maximum connections.
• Set duration of WLAN Extender: Set the time for keeping WLAN extender on when idle. Tap Keep WLAN
extender on to choose the duration.
• Manage the users
On the Home screen, go to Smart WLAN -> WLAN Extender. The connected and blocked devices
will be displayed on the list. Select any of the connected devices to set the following options:
• View the details of the connected device: Tap a connected device to view the MAC address and IP
address.
• Block a device: Tap the connected device you want to block and tap BLOCK. The blocked device can’t
search your WLAN extender singals.
• Unblock a devide: Tap the blocked device you want to unblock and tap UNBLOCK.