Operation Manual

29Chapter 4 . Calls
• Add phone number: Tap Add phone number, enter the number you want to block and tap .
• Add prefix: Tap Add prefix, enter the number prefix you want to block and tap .
• Add numbers from contacts/call log: Tap Add from contacts, select the numbers you want to block from
contact or call log, and tap .
• Add numers from messages: Tap Add from messages, select the numbers you want to block from
messages list, and tap .
Clear blacklist numbers
Go to Harassment filter, touch and hold a number, select the mumbers you want to delete, and then tap
-> DELETE.
Edit numbers in blacklist
Go to Harassment filter, tap a number to edit it. Tap after finishing to save changes.
View the locked messages and calls
Go to Harassment filter -> -> Blocked numbers to view the blocked messages and calls.
Harassment filter settings
Go to Harassment filter -> -> Settings to configure the following settings:
• Block unknown number: Turn on the switch to block unknown numbers.
• Block notification: Turn on the switch to get reminders when your phone intercepts a harassing call or spam
message.
4. 7 Call settings
Go to Phone -> -> Call settings to configure the following call settings:
Note:
1. The following features may vary depending on your carrier.
2. If you insert two SIM cards and you don’t set the default SIM card for calls, Select SIM for calls will display on the list.
You can choose your default for calls, or choose Ask every time.
Voicemail
Divert calls to your voicemail when your phone is switched off or when there is no cellular coverage. Callers can
leave a voice message which you can listen to later.
• Service: Your carrier.
• Set up: Tap Setup -> Voicemail number to enter your voicemail number and tap OK.
• Notifications: Tap Notifications, you can set sound, enable or disable vibration, and configure other
advaced settings.
Note:
Voicemail must be supported by your carrier. Please ensure that you have subscribed to this service. Contact your carrier for
information about their voicemail service.
Fixed Dialing Numbers
Use fixed dialing numbers to restrict outgoing calls to whitelisted numbers.
• Enable FDN: Tap Enable FDN, enter PIN2 and tap OK.
• Change PIN2: Tap Change PIN2 and follow the onscreen instructions to change your PIN2.
• FDN list: Tap FDN list to view your FDN numbers. Tap -> Add contact to add a FDN number.
Note:
1. Your PIN2 code is required to enable fixed dialing numbers. To obtain your PIN2 code, contact your carrier.