Operation Manual

30Chapter 4 . Calls
2. Numbers are added to the FDN list, and when activated, FDN restricts outgoing calls to only those numbers listed, or
to numbers with certain prefixes.
3. PIN2 must be entered before hand or when applying such settings, which is unique to each card and initially provided
by the network operator.
Call forwarding
If your phone can not answer or you do not want to answer the call, you can transfer the call to another phone
number.
Tap Always forward/When busy/When unanswered/When unreachable, enter the phone number you
want to transfer to and tap TURN ON. Then the call will be transfered to the present number always, when your
own number is busy, unanswered, or unreacheable.
Call barring
Turn on the switch to prevent all or certain calls from reaching to or from your phone number.
• Cancel all barring: Tap Cancel all, enter the barring password and tap OK.
• Change barring password: Tap Change barring password, then follow the onscreen instructions to
change your barring password.
Additional settings
• Caller ID: Display your number in outgoing calls.
• Call waiting: Turn on the switch to enable call waiting, then your will be notified of incoming calls during
a call.
4. 8 Advance settings
Go to Phone -> -> Advance settings to configure the following settings:
Display options
• Sort order: Tap Sort by to choose sorting by First name/Last name.
• Name format: Tap Name format to choose First name first/Last name first.
Sounds & vibration
• Ringtone: Tap SIM1 ringtone and SIM2 ringtone to choose the ringtone you like.
• Also vibrate for calls: If Also vibrate for calls is enabled, your phone will vibrate when receiving incoming
calls.
• Dial pad touch tones: Turn on or turn off the switch to enable or disable dial pad touch tones.
Quick responses
Tap the quick response you want to edit. Tap OK after finishing.
Auxiliary funtions
• TTY mode: Tap TTY mode to configure the TTY mode. Tap to view the information of TTY mode.
• Power buttons ends call: If Power buttons ends call is enabled, you can end call by pressing Power button.