Operation Manual

40Chapter 6 . Camera and Photos
for different subjects and light conditions: Traffic flow and Light painting.
1. Tap on the screen or swipe right on the screen and choose STREAMER. Tap to view the details
about STREAMER mode.
2. Tap to change the shooting mode. You can tap to set the flash time as 0s, 3s, 10s or 20s in the Light
painting mode.
3. Choose the view you want to capture, position the camera, and then tap or press the Volume button, or
press and hold your fingerprint sensor to start shooting.
4. A preview of the image is displayed in the viewfinder. Tap or press the Volume button, or press and hold
your fingerprint sensor to stop capturing.
Continuous shot
Use continuous shot when you want to take a photo of a moving subject, such as during a football match. The
camera will capture several images in quick succession.
1. Touch and hold the or press and hold the Volume button to start the burst sequence. The number of
captured photos will be displayed in the bottom of the viewfinder.
2. Release or Volume button to stop the burst shooting.
3. Tap the image thumbnail or go to
Photos -> Camera to view the photos.
Note:
1. This feature is not available in Pro mode, Panorama mode, Streamer mode and Face beauty mode.
2. You can take up to 40 photos in one burst sequence, provided that there is enough storage space on your phone.
6. 5 Camera and video settings
Open Camera, tap or swipe right on the screen and tap to configure the following camera settings.
Auto night view: Turn on the switch to enable night mode when there is inadequate ambient light.
Save the location: Save the location where the photo was taken (only when your phone is connected to the
Internet and enabled location access).
1 ) Switch on Save the location and then take a photo.
2 ) Connect your phone to a computer (taking Windows 7 as an example) with a USB cable, Allow access
to device data will be displayed in a popup dialog. Tap ALLOW.
3 ) Go to Computer -> Neffos X9 -> Internal storage -> DCIM -> Camera.
4 ) Right-click on a picture and click Properties, you can see the location where the photo was taken.
Grids: When Grids is on, composition of pictures is more convenient.
Camera watermark: When Camera watermark is on, there will be a watermark of brand model added to
the photo.
Shutter sound: When Shutter sound is on, a shutter sound is played during taking a picture or recording
a video.
Timer: Set time-lapse interval, such as Off/3/10 seconds.
Take photos with volume buttons: Turn on the switch, you can press the Volume-up button or Volume-
down button to take photos.
Press and hold your fingerprint to capture: Turn on the switch, you can take photos with pressing and
holding your fingerprint.
Screen off snapshot: Turn on the switch, you can press the Volume-down button twice to take a photo
when the screen is off. Due to the rapid capture time, the image quality may decrease for night-time or
close-up shots. Choose a location with ample light and shoot from a suitable distance. The feature is not
available during music playback or when your phone has less than 2% battery power remaining. Flash
mode is not available when your phone has less than 5% power remaining.