Operation Manual

67Chapter 17 . Settings
display on the screen, and then follow the onscreen instructions to use it.
17. 6 Sounds, vibration and Do not disturb
Go to Settings -> Sounds, vibration & Do not disturb to configure the volume, ringtones, and vibrations
for your phone.
Do not disturb
When Do not disturb is enabled, will appear in the status bar. Calls and alerts will be silenced except the
items you set as priority.
Tap Do not disturb, and you can configure the following settings:
• Manually enable Do not disturb: Switch on Manual to enable Do not disturb immediately. You can also
swipe down from the status bar to open the Quick Settings Panel, and then tap Do not disturb.
• Scheduledly enable Do not disturb: Switch on Scheduled and set the start time, end time and repeat for
Do not disturb.
• Set exceptions for Do not disturb: Tap Exceptions and you can choose the following modes:
• Priority only: You can set priority only allows alarms, reminders, events, calls and messages. Tap Priority
only allows to configure the settings as desired.
• Alarms only: Only allow alarm to send notifications when enabling Do not disturb.
• Total silence: Disable all notifications.
17. 7 Display
Configure the display settings to personalize your phone. For example, you can change the wallpaper, font size,
and screen-off time.
Go to Settings -> Display. You can configure the following settings:
Enable adaptive brightness
You have following two ways to enable adaptive brightness:
• Switch on Adaptive brightness and your phone will automatically adjust the screen brightness according
to the ambient brightness.
• Swipe down from the status bar to open the Quick Settings Panel, and check Auto to optimize the
brightness level for available light.
Enable LED indicator
• Notifications indicator: Tap LED indicator and switch on Notifications indicator, and then the LED
indicator will blink green when you receive notifications.
• Charging indicator: Tap LED indicator and switch on Charging indicator, and then the LED indicator will
light in yellow when your phone is offscreen charging, and it turns to green when the charging is complete.
Enable Eye protection mode
You can enable Eye protection mode to decrease the blue light of the screen so as to reduce harm to the retina.
1. Tap Eye protection mode and switch on Eye protection mode
2. Drag the slider to adjust the color temperature for a cooler or warmer screen color.
3. Make a schedule by switching on Scheduled and setting the specific time.