Operation Manual

3Chapter 1 .

Get started

1. 3 Put in the cards

Insert Nano SIM cards and microSD card (optional)

Nano-SIM

microSD

1. Eject the SIM card tray by inserting the SIM ejector pin provided into the hole on the tray.

2. Place the the card(s) into the tray with the gold contacts face down. The card tray can support two Nano-

SIM cards or a Nano-SIM card and a mircoSD card.

3. Insert the card tray back into your phone in the correct orientation.

Note:

Take care not to scratch your device or harm yourself when using the SIM ejector pin. Store the SIM ejector pin out of the

reach of children to prevent accidental swallowing or injury.

1. 4 Initial setup

It is recommended to insert your SIM card before you start the initial setup.

Press and hold the Power button to turn on your phone, and then follow the onscreen instructions to complete

the initial setup.

Note:

To avoid low battery power, your phone will shut down automatically if not operated on Initial screen in 30 minutes.

1. Select your language and location, and then tap .

2. Proceed to Connect to mobile network screen.

If you insert two SIM cards, follow the onscreen instructions to finish dual-SIM settings. You can always

adjust dual-SIM settings in Settings -> Dual-SIM & network.

Your phone will automatically list available WLAN networks. Select the network you want to connect to (If

you want to view more Wi-Fi networks, tap See all Wi-Fi networks), and then enter the password to access

the Internet (This can take up to 2 minutes). If you have activated mobile data services with your carrier,

you can tap Use cellular network for setup. Or if you don’t want to connect to network, just tap SKIP ->

CONTINUE to skip this step.

Note:

Using cellular network for setup may result in additional fees. Contact your carrier for information about your cellular

data plan rates.