User's Manual

-28-
previously specified.
 Call waiting: After you choose Activate, the mobile phone will contact the network. A moment later,
the network will make a response and send a message to acknowledge your operation. If the call
waiting function is activated, the network will alert you and the mobile phone screen will display the
incoming call number if others are calling you while you are already in a conversation.
 Call barring: The call barring function enables you to bar calls as needed. When setting this function,
you need to use a network barring code, which can be obtained from the network operator. If the code
is wrong, an error message will be prompted on the screen. After selecting a call barring option,
continue to select Activate or Deactivate. The mobile phone will prompt you to input the call barring
code and then contact the network. A moment later, the network will make a response and send the
operation results to the mobile phone.
 Others: You can set IP shortcut key ,call time minute reminder, auto redial, vibration when connected
and auto record voice call through this function..
Network selection
 Network selection: Set Network selection mode to Automatic or Manual. Automatic is recommended.
When Network selection mode is set to Automatic, the mobile phone will prefer the network where the
SIM card is registered. When Network selection mode is set to Manual, you need to select the network
operator's network where the SIM card is registered.