user manual

19
STORAGE
Every time your working session with the machine is over, please turn the tractor off,
clean the shredding unit and check the stretching of the driving belts (see paragraph
Maintenance)
Make sure that the radiant mass of the air/oil exchanger is always clean to guarantee
performances in time and, above all, to guarantee that the electric parts work, as they
should. Clean the splits with compressed air or water taking care of directing the jet
parallel to the splits in order not to damage them. It is of the utmost importance that
the electric engine is unplugged from the voltage during this operation and it is well
protected against water jets.
Store the shredder indoors. If you store it in a cold place and if you are not using it
for a long time, we suggest you to loosen the driving belts and the discharging
conveyor belt. Please roll the conveyor belt completely open before storing the bio-
shredder (working position).
WARRANTY
The company NEGRI MARCO guarantees this machine against manufacturing
failures and against other failures related to the materials for 2 years starting from the
purchase date. The guarantee is valid for every person who acts for purposes, which
are not part of his commercial or professional activity.
The terms stated in this guarantee are in compliance with the 1999/44/CE European
Directive.
For people using the product for professional aims, the guarantee is valid only if it is
provided with the till receipt or the guarantee certificate (attached to this booklet),
filled in by the seller and sent within 10 days from the purchase date.
As far as the internal combustion engines and the electrical ones are concerned, the
guarantee which runs for them, is the one given by the engine builders, that it is valid
1 year long.
The guarantee excludes every responsibility related to direct or indirect damages to
people or things and its effect ends if the pieces returned were stripped down,
tampered or repaired by unauthorised centres. The guarantee does not cover the
damages caused by the non-respect of the use directions, either.
The parts that are largely used and for this reason get quickly worn, such as gaskets,
chains, belts, valves, bearings, hydraulic pipes, blades, etc., are not covered by the
guarantee.
The guarantee excludes also the transport costs, the costs for inspections, the
assembling and dismantling carried out by one of our technicians following the
customer’s request to solve problems which then resulted not to be dependent from
us.
In case of any damage, please contact an authorised centre and use original spare
parts, specifying the model and the version. When no original spare parts are
assembled, no guarantee right valid.