User's Manual

8 Nektar SE49 User Guide www.nektartech.com
Sending a Bank MSB Message
To send a Bank MSB message, do the following:
 Press the [Octave Up]+[Transpose Up] buttons at the same time. The LED above the button will blink and the color is
orange to indicate setup is active.
 Press the low F1 on your SE49 keyboard.
 Enter the Bank number you want (from 0 to 127) using the white number keys spanning G3–B4.
 Press Enter (C5). This will send the message immediately and exit Setup.
Transpose
You can quickly set a transpose value in the Setup menu. This is ideal if the Transpose buttons are assigned to other
functions or if you just need to change a value quickly.
 Press the [Octave Up]+[Transpose Up] buttons at the same time. The LED above the button will blink and the color is
orange to indicate setup is active.
 Press the low F#1 on your SE49 keyboard.
 Enter the transpose value number you want (from 0 to 12) using the white number keys spanning G3–B4 (G4-B5 on
SE4961).
 Press Enter (C5). This will change the Transpose setting immediately and exit Setup.
Octave
You can also change the octave setting on the keyboard by doing the following:
 Press the [Octave Up]+[Transpose Up] buttons at the same time. The LED above the button will blink and the color is
orange to indicate setup is active.
 Press the low G1 on your SE49 keyboard.
 Enter the octave value number you want entering 0 first for negative octave values (i.e. 01 for –1) and single digit values
for positive values (i.e 1 for +1). You enter the values using the white number keys spanning G3–B4 (G4-B5 on SE4961).
 Press Enter (C5). This will change the Octave setting immediately and exit Setup.