User's Manual

Introduction:
The Alliance Customer Service Button kit includes the following: Customer Service Button, Shelf Mount, 3 x
AAA Batteries and Screwdriver.
Before you begin, unpack and verify you have all the correct parts.
Step 1: Remove the battery door with the included screwdriver to expose the battery compartment.
Step 2: Install the three AAA batteries as indicated in the battery compartment graphic.
Step 3: Adjust the message to be trigger by selecting the correct message from the table in this manual and match-
ing those settings on the DIP switch positions.
Step 4: Replace battery cover and screw closed.
Step 5: Depending upon the type of mount included with the kit attach the customer service button to the shelf or
glass display case.
Step 6: Push the button to verify operation.