User's Manual

Messager USB Duo Audio Content Preparation:

AllmessagesthatareavailablefortheMessagerUSBDuotoplayarestoredonanindustrystandardUSBash

drive. MessagesshouldbeformattedasamonoMP3lenottoexceed128Kbps@48KHz. Follow these steps to

addorremovelesfromaUSBashdrive.

Step 1:PlugtheUSBashdriveintoanavailableUSBportonaanyPCorMACcompatiblecomputer.Theash

drive should show up as a “Removable Disk” on the computer.

Step 2:Drag‘n’dropthele(s)totheUSBashdrivein the order you want them to be played on the unit. If

removaloflesarerequiredthenselectthelesandpressthe<delete>keyonthekeyboard.

Step 3:RemovetheUSBashdrivefromthecomputer.

Step 4:PlugtheUSBashdriveintotheMessagerUSBDuoforplayback.

If the USB drive ever needs to be erased completely then it can be formatted using your computer. Drives smaller

than 2GB can be formatted using FAT, and drives 2GB or larger can use FAT32.

Note:Audiolesshouldbenamedusingalpha-numericlabels(A-Z,0-9).

Any other characters or symbols, such as +, -, /, (, ), &, etc. should NOT be used.