User's Manual

2
Wireless FOB Operation
1. Press and hold the wireless keyfob button for 1 second.
Hold for 1 second
2. A RED led on the FOB will indicate the signal has been sent*.
3. Verify audio message is playing over the stores PA system.
4. If there is any reception issue with the wireless keyfob then the antenna on the receiver is not positioned in the store
correctly or it is too far of a distance for the keyfob.
* If the RED led on the FOB ashes 5 times then that indicates the battery is low and should be replaced
with a replacement CR2032 coin cell battery.
RED LED