Specifications

10 TROUBLESHOOTING
Fault
Unit is wobbling.
Reduced spray or no spray.
Power button does not turn on the machine.
Cause
1. Mop pads are not installed properly.
1. Reservoir may be empty.
2. System isn’t completely primed.
3. Spray nozzle on base is clogged.
1. Handle is standing upright.
Treatment
1. Turn power OFF and follow instructions on
page 8 for replacing mop pads.
1. Rell reservoir.
2. Hold spray button for 10 to 15 seconds to
make sure the solution has owed to the spray
nozzle.
3. Turn power OFF. Use a pin to clean the spray
nozzle located at the front of the machine.
1. Recline handle.