User Manual

2.2 Installation of battery
This machine uses external battery, please refer
to the picture to install.
2.2.1 Install the battery with the metal contact of
the battery facing upwards.
2.2.2 Follow the arrow direction on battery
compartment, push the battery until a “Click” is
sounded which means the installation is complete.
Notice：
Please install battery correctly, incorrect installation
will not boot or damage the camcorder, and may
cause accidents!
Notice:Please confirm local power specifications! Keep ventilation during charging, no covering. After charging,
remove the power asap!
When using computer USB to charge the unit, please turn off the unit, otherwise the computer may be damaged!
2.3Charge the battery
2.3.1 Install the battery, connect the unit and charger with USB cable to the mains. The indicator“CHG”lights
up indicating the battery is being charged, and the indicator lights off after the battery is charged.
2.3.2 Connect the computer to charge the unit. Connect the unit to the computer with a USB cable. The
indicator“CHG”lights up indicating the battery is being charged, and the indicator lights off after the battery
is charged.
2.3.3 Charger specifications: Input AC100~240V/50~60HZ, Output DC 5V/15A, please confirm the charger
andpower supply specifications.
2.3.4 In order to adapt to long time shooting, the unit can be charged while shooting. To use this function,
please use the tripod to fix the unit, and follow the steps of 2.3.1 to open the unit.
8
1.Install battery into the
battery compartment
according to this
direction.
2.Push battery until a
“Click” is sounded
2 Start to use