User Manual
Table Of Contents
23
提示音设置
光源频率
无线热点
中
50HZ
高
中
低
关闭
3 Use the camera
Set system parameters such as language, key tone, light frequency, time and date.
In photo or video mode, press【MENU】to enter the setup menu, press【MODE】to switch to system set
menu, and the gear icon in the upper left corner of the screen will be highlighted, indicates that the system
set menu is displayed. The following operations are performed in this menu. After setting, press【MENU】
to exit system set.
Touch screen operation:
In photo or video mode, click the "MENU" icon in the lower right corner of the screen to enter the setup
menu, and click the " " icon to switch to system set.
Click the " " icon on the left side of the screen to exit system set.
3.4.1
system set menu W/T
W/T
Beep set
This function is to set whether the key sound is on.
3.4.1 In , press【 】 to select "Beep set", press【PHOTO】to enter into the sub-menu;
3.4.2 Press【 】to select the desired operation: High / Middle / Low/Off.
3.4.3 Press【PHOTO】to save and back to system set.
Touch screen operation:
Click “Beep set” to enter into the sub-menu, click the desired operation: High / Middle / Low/Off. It will
automatically back to the system set after setting.
The following operations are the same.
3.4System set